Run

Inheritance: java.lang.Object, com.aspose.words.Node, com.aspose.words.Inline

public class Run extends Inline

Represents a run of characters with the same font formatting.

To learn more, visit the Programming with Documents documentation article.

Remarks:

All text of the document is stored in runs of text.

Run can only be a child of Paragraph or inline StructuredDocumentTag.

Examples:

Shows how to format a run of text using its font property.


 Document doc = new Document();
 Run run = new Run(doc, "Hello world!");

 Font font = run.getFont();
 font.setName("Courier New");
 font.setSize(36.0);
 font.setHighlightColor(Color.YELLOW);

 doc.getFirstSection().getBody().getFirstParagraph().appendChild(run);
 doc.save(getArtifactsDir() + "Font.CreateFormattedRun.docx");
 

Shows how to construct an Aspose.Words document by hand.


 Document doc = new Document();

 // A blank document contains one section, one body and one paragraph.
 // Call the "RemoveAllChildren" method to remove all those nodes,
 // and end up with a document node with no children.
 doc.removeAllChildren();

 // This document now has no composite child nodes that we can add content to.
 // If we wish to edit it, we will need to repopulate its node collection.
 // First, create a new section, and then append it as a child to the root document node.
 Section section = new Section(doc);
 doc.appendChild(section);

 // Set some page setup properties for the section.
 section.getPageSetup().setSectionStart(SectionStart.NEW_PAGE);
 section.getPageSetup().setPaperSize(PaperSize.LETTER);

 // A section needs a body, which will contain and display all its contents
 // on the page between the section's header and footer.
 Body body = new Body(doc);
 section.appendChild(body);

 // Create a paragraph, set some formatting properties, and then append it as a child to the body.
 Paragraph para = new Paragraph(doc);

 para.getParagraphFormat().setStyleName("Heading 1");
 para.getParagraphFormat().setAlignment(ParagraphAlignment.CENTER);

 body.appendChild(para);

 // Finally, add some content to do the document. Create a run,
 // set its appearance and contents, and then append it as a child to the paragraph.
 Run run = new Run(doc);
 run.setText("Hello World!");
 run.getFont().setColor(Color.RED);
 para.appendChild(run);

 Assert.assertEquals("Hello World!", doc.getText().trim());

 doc.save(getArtifactsDir() + "Section.CreateManually.docx");
 

Shows how to add, update and delete child nodes in a CompositeNode’s collection of children.


 Document doc = new Document();

 // An empty document, by default, has one paragraph.
 Assert.assertEquals(1, doc.getFirstSection().getBody().getParagraphs().getCount());

 // Composite nodes such as our paragraph can contain other composite and inline nodes as children.
 Paragraph paragraph = doc.getFirstSection().getBody().getFirstParagraph();
 Run paragraphText = new Run(doc, "Initial text. ");
 paragraph.appendChild(paragraphText);

 // Create three more run nodes.
 Run run1 = new Run(doc, "Run 1. ");
 Run run2 = new Run(doc, "Run 2. ");
 Run run3 = new Run(doc, "Run 3. ");

 // The document body will not display these runs until we insert them into a composite node
 // that itself is a part of the document's node tree, as we did with the first run.
 // We can determine where the text contents of nodes that we insert
 // appears in the document by specifying an insertion location relative to another node in the paragraph.
 Assert.assertEquals("Initial text.", paragraph.getText().trim());

 // Insert the second run into the paragraph in front of the initial run.
 paragraph.insertBefore(run2, paragraphText);

 Assert.assertEquals("Run 2. Initial text.", paragraph.getText().trim());

 // Insert the third run after the initial run.
 paragraph.insertAfter(run3, paragraphText);

 Assert.assertEquals("Run 2. Initial text. Run 3.", paragraph.getText().trim());

 // Insert the first run to the start of the paragraph's child nodes collection.
 paragraph.prependChild(run1);

 Assert.assertEquals("Run 1. Run 2. Initial text. Run 3.", paragraph.getText().trim());
 Assert.assertEquals(4, paragraph.getChildNodes(NodeType.ANY, true).getCount());

 // We can modify the contents of the run by editing and deleting existing child nodes.
 ((Run) paragraph.getChildNodes(NodeType.RUN, true).get(1)).setText("Updated run 2. ");
 paragraph.getChildNodes(NodeType.RUN, true).remove(paragraphText);

 Assert.assertEquals("Run 1. Updated run 2. Run 3.", paragraph.getText().trim());
 Assert.assertEquals(3, paragraph.getChildNodes(NodeType.ANY, true).getCount());
 

Constructors

ConstructorDescription
Run(DocumentBase doc)Initializes a new instance of the Run class.
Run(DocumentBase doc, String text)Initializes a new instance of the Run class.

Methods

MethodDescription
accept(DocumentVisitor visitor)Accepts a visitor.
clearRunAttrs()
dd()
deepClone(boolean isCloneChildren)Creates a duplicate of the node.
fetchInheritedRunAttr(int fontAttr)
getAncestor(int ancestorType)
getAncestor(Class ancestorType)Gets the first ancestor of the specified object type.
getCustomNodeId()Specifies custom node identifier.
getDirectRunAttr(int key)
getDirectRunAttr(int key, int revisionsView)
getDocument()Gets the document to which this node belongs.
getDocument_IInline()
getFont()Provides access to the font formatting of this object.
getNextSibling()Gets the node immediately following this node.
getNodeType()Returns NodeType.RUN.
getParentNode()Gets the immediate parent of this node.
getParentParagraph()Retrieves the parent Paragraph of this node.
getParentParagraph_IInline()
getPhoneticGuide()Gets a getPhoneticGuide() object.
getPreviousSibling()Gets the node immediately preceding this node.
getRange()Returns a Range object that represents the portion of a document that is contained in this node.
getText()Gets the text of the run.
isComposite()Returns true if this node can contain other nodes.
isDeleteRevision()Returns true if this object was deleted in Microsoft Word while change tracking was enabled.
isFormatRevision()Returns true if formatting of the object was changed in Microsoft Word while change tracking was enabled.
isInsertRevision()Returns true if this object was inserted in Microsoft Word while change tracking was enabled.
isMoveFromRevision()Returns true if this object was moved (deleted) in Microsoft Word while change tracking was enabled.
isMoveToRevision()Returns true if this object was moved (inserted) in Microsoft Word while change tracking was enabled.
isPhoneticGuide()Gets a boolean value indicating either the run is a phonetic guide.
nextPreOrder(Node rootNode)Gets next node according to the pre-order tree traversal algorithm.
nodeTypeToString(int nodeType)
previousPreOrder(Node rootNode)Gets the previous node according to the pre-order tree traversal algorithm.
remove()Removes itself from the parent.
removeMoveRevisions()
removeRunAttr(int key)
setCustomNodeId(int value)Specifies custom node identifier.
setRunAttr(int key, Object value)
setText(String value)Sets the text of the run.
toString()
toString(SaveOptions saveOptions)Exports the content of the node into a string using the specified save options.
toString(int saveFormat)

Run(DocumentBase doc)

public Run(DocumentBase doc)

Initializes a new instance of the Run class.

Remarks:

When Run is created, it belongs to the specified document, but is not yet part of the document and Node.getParentNode() is null .

To append Run to the document use M:Aspose.Words.CompositeNode.InsertAfter1(0,Aspose.Words.Node) or M:Aspose.Words.CompositeNode.InsertBefore1(0,Aspose.Words.Node) on the paragraph where you want the run inserted.

Examples:

Shows how to construct an Aspose.Words document by hand.


 Document doc = new Document();

 // A blank document contains one section, one body and one paragraph.
 // Call the "RemoveAllChildren" method to remove all those nodes,
 // and end up with a document node with no children.
 doc.removeAllChildren();

 // This document now has no composite child nodes that we can add content to.
 // If we wish to edit it, we will need to repopulate its node collection.
 // First, create a new section, and then append it as a child to the root document node.
 Section section = new Section(doc);
 doc.appendChild(section);

 // Set some page setup properties for the section.
 section.getPageSetup().setSectionStart(SectionStart.NEW_PAGE);
 section.getPageSetup().setPaperSize(PaperSize.LETTER);

 // A section needs a body, which will contain and display all its contents
 // on the page between the section's header and footer.
 Body body = new Body(doc);
 section.appendChild(body);

 // Create a paragraph, set some formatting properties, and then append it as a child to the body.
 Paragraph para = new Paragraph(doc);

 para.getParagraphFormat().setStyleName("Heading 1");
 para.getParagraphFormat().setAlignment(ParagraphAlignment.CENTER);

 body.appendChild(para);

 // Finally, add some content to do the document. Create a run,
 // set its appearance and contents, and then append it as a child to the paragraph.
 Run run = new Run(doc);
 run.setText("Hello World!");
 run.getFont().setColor(Color.RED);
 para.appendChild(run);

 Assert.assertEquals("Hello World!", doc.getText().trim());

 doc.save(getArtifactsDir() + "Section.CreateManually.docx");
 

Parameters:

ParameterTypeDescription
docDocumentBaseThe owner document.

Run(DocumentBase doc, String text)

public Run(DocumentBase doc, String text)

Initializes a new instance of the Run class.

Remarks:

When Run is created, it belongs to the specified document, but is not yet part of the document and Node.getParentNode() is null .

To append Run to the document use M:Aspose.Words.CompositeNode.InsertAfter1(0,Aspose.Words.Node) or M:Aspose.Words.CompositeNode.InsertBefore1(0,Aspose.Words.Node) on the paragraph where you want the run inserted.

Examples:

Shows how to format a run of text using its font property.


 Document doc = new Document();
 Run run = new Run(doc, "Hello world!");

 Font font = run.getFont();
 font.setName("Courier New");
 font.setSize(36.0);
 font.setHighlightColor(Color.YELLOW);

 doc.getFirstSection().getBody().getFirstParagraph().appendChild(run);
 doc.save(getArtifactsDir() + "Font.CreateFormattedRun.docx");
 

Parameters:

ParameterTypeDescription
docDocumentBaseThe owner document.
textjava.lang.StringThe text of the run.

accept(DocumentVisitor visitor)

public boolean accept(DocumentVisitor visitor)

Accepts a visitor.

Remarks:

Calls DocumentVisitor.visitRun(com.aspose.words.Run).

For more info see the Visitor design pattern.

Examples:

Shows how to print the node structure of every header and footer in a document.


 public void headerFooterToText() throws Exception {
     Document doc = new Document(getMyDir() + "DocumentVisitor-compatible features.docx");
     HeaderFooterStructurePrinter visitor = new HeaderFooterStructurePrinter();

     // When we get a composite node to accept a document visitor, the visitor visits the accepting node,
     // and then traverses all the node's children in a depth-first manner.
     // The visitor can read and modify each visited node.
     doc.accept(visitor);

     System.out.println(visitor.getText());

     // An alternative way of accessing a document's header/footers section-by-section is by accessing the collection.
     HeaderFooter[] headerFooters = doc.getFirstSection().getHeadersFooters().toArray();
     Assert.assertEquals(3, headerFooters.length);
 }

 /// 
 /// Traverses a node's non-binary tree of child nodes.
 /// Creates a map in the form of a string of all encountered HeaderFooter nodes and their children.
 /// 
 public static class HeaderFooterStructurePrinter extends DocumentVisitor {
     public HeaderFooterStructurePrinter() {
         mBuilder = new StringBuilder();
         mVisitorIsInsideHeaderFooter = false;
     }

     public String getText() {
         return mBuilder.toString();
     }

     /// 
     /// Called when a Run node is encountered in the document.
     /// 
     public int visitRun(final Run run) {
         if (mVisitorIsInsideHeaderFooter) indentAndAppendLine("[Run] \"" + run.getText() + "\"");

         return VisitorAction.CONTINUE;
     }

     /// 
     /// Called when a HeaderFooter node is encountered in the document.
     /// 
     public int visitHeaderFooterStart(final HeaderFooter headerFooter) {
         indentAndAppendLine("[HeaderFooter start] HeaderFooterType: " + headerFooter.getHeaderFooterType());
         mDocTraversalDepth++;
         mVisitorIsInsideHeaderFooter = true;

         return VisitorAction.CONTINUE;
     }

     /// 
     /// Called after all the child nodes of a HeaderFooter node have been visited.
     /// 
     public int visitHeaderFooterEnd(final HeaderFooter headerFooter) {
         mDocTraversalDepth--;
         indentAndAppendLine("[HeaderFooter end]");
         mVisitorIsInsideHeaderFooter = false;

         return VisitorAction.CONTINUE;
     }

     /// 
     /// Append a line to the StringBuilder, and indent it depending on how deep the visitor is into the document tree.
     /// 
     /// 
     private void indentAndAppendLine(final String text) {
         for (int i = 0; i < mDocTraversalDepth; i++) {
             mBuilder.append("|  ");
         }

         mBuilder.append(text + "\r\n");
     }

     private boolean mVisitorIsInsideHeaderFooter;
     private int mDocTraversalDepth;
     private final StringBuilder mBuilder;
 }
 

Parameters:

ParameterTypeDescription
visitorDocumentVisitorThe visitor that will visit the node.

Returns: boolean - false if the visitor requested the enumeration to stop.

clearRunAttrs()

public void clearRunAttrs()

dd()

public void dd()

deepClone(boolean isCloneChildren)

public Node deepClone(boolean isCloneChildren)

Creates a duplicate of the node.

Remarks:

This method serves as a copy constructor for nodes. The cloned node has no parent, but belongs to the same document as the original node.

This method always performs a deep copy of the node. The isCloneChildren parameter specifies whether to perform copy all child nodes as well.

Examples:

Shows how to clone a composite node.


 Document doc = new Document();
 Paragraph para = doc.getFirstSection().getBody().getFirstParagraph();
 para.appendChild(new Run(doc, "Hello world!"));

 // Below are two ways of cloning a composite node.
 // 1 -  Create a clone of a node, and create a clone of each of its child nodes as well.
 Node cloneWithChildren = para.deepClone(true);

 Assert.assertTrue(((CompositeNode) cloneWithChildren).hasChildNodes());
 Assert.assertEquals("Hello world!", cloneWithChildren.getText().trim());

 // 2 -  Create a clone of a node just by itself without any children.
 Node cloneWithoutChildren = para.deepClone(false);

 Assert.assertFalse(((CompositeNode) cloneWithoutChildren).hasChildNodes());
 Assert.assertEquals("", cloneWithoutChildren.getText().trim());
 

Parameters:

ParameterTypeDescription
isCloneChildrenbooleanTrue to recursively clone the subtree under the specified node; false to clone only the node itself.

Returns: Node - The cloned node.

fetchInheritedRunAttr(int fontAttr)

public Object fetchInheritedRunAttr(int fontAttr)

Parameters:

ParameterTypeDescription
fontAttrint

Returns: java.lang.Object

getAncestor(int ancestorType)

public CompositeNode getAncestor(int ancestorType)

Parameters:

ParameterTypeDescription
ancestorTypeint

Returns: CompositeNode

getAncestor(Class ancestorType)

public CompositeNode getAncestor(Class ancestorType)

Gets the first ancestor of the specified object type.

Remarks:

The ancestor type matches if it is equal to ancestorType or derived from ancestorType .

Examples:

Shows how to find out if a tables are nested.


 public void calculateDepthOfNestedTables() throws Exception {
     Document doc = new Document(getMyDir() + "Nested tables.docx");
     NodeCollection tables = doc.getChildNodes(NodeType.TABLE, true);
     for (int i = 0; i < tables.getCount(); i++) {
         Table table = (Table) tables.get(i);

         // Find out if any cells in the table have other tables as children.
         int count = getChildTableCount(table);
         System.out.print(MessageFormat.format("Table #{0} has {1} tables directly within its cells", i, count));

         // Find out if the table is nested inside another table, and, if so, at what depth.
         int tableDepth = getNestedDepthOfTable(table);

         if (tableDepth > 0)
             System.out.println(MessageFormat.format("Table #{0} is nested inside another table at depth of {1}", i, tableDepth));
         else
             System.out.println(MessageFormat.format("Table #{0} is a non nested table (is not a child of another table)", i));
     }
 }

 // Calculates what level a table is nested inside other tables.
 //
 // Returns An integer containing the level the table is nested at.
 // 0 = Table is not nested inside any other table
 // 1 = Table is nested within one parent table
 // 2 = Table is nested within two parent tables etc..
 private static int getNestedDepthOfTable(final Table table) {
     int depth = 0;
     Node parent = table.getAncestor(table.getNodeType());

     while (parent != null) {
         depth++;
         parent = parent.getAncestor(Table.class);
     }

     return depth;
 }

 // Determines if a table contains any immediate child table within its cells.
 // Does not recursively traverse through those tables to check for further tables.
 //
 // Returns true if at least one child cell contains a table.
 // Returns false if no cells in the table contains a table.
 private static int getChildTableCount(final Table table) {
     int childTableCount = 0;

     for (Row row : table.getRows()) {
         for (Cell cell : row.getCells()) {
             TableCollection childTables = cell.getTables();

             if (childTables.getCount() > 0) childTableCount++;
         }
     }

     return childTableCount;
 }
 

Parameters:

ParameterTypeDescription
ancestorTypejava.lang.ClassThe object type of the ancestor to retrieve.

Returns: CompositeNode - The ancestor of the specified type or null if no ancestor of this type was found.

getCustomNodeId()

public int getCustomNodeId()

Specifies custom node identifier.

Remarks:

Default is zero.

This identifier can be set and used arbitrarily. For example, as a key to get external data.

Important note, specified value is not saved to an output file and exists only during the node lifetime.

Examples:

Shows how to traverse through a composite node’s collection of child nodes.


 Document doc = new Document();

 // Add two runs and one shape as child nodes to the first paragraph of this document.
 Paragraph paragraph = (Paragraph) doc.getChild(NodeType.PARAGRAPH, 0, true);
 paragraph.appendChild(new Run(doc, "Hello world! "));

 Shape shape = new Shape(doc, ShapeType.RECTANGLE);
 shape.setWidth(200.0);
 shape.setHeight(200.0);
 // Note that the 'CustomNodeId' is not saved to an output file and exists only during the node lifetime.
 shape.setCustomNodeId(100);
 shape.setWrapType(WrapType.INLINE);
 paragraph.appendChild(shape);

 paragraph.appendChild(new Run(doc, "Hello again!"));

 // Iterate through the paragraph's collection of immediate children,
 // and print any runs or shapes that we find within.
 NodeCollection children = paragraph.getChildNodes(NodeType.ANY, false);

 Assert.assertEquals(3, paragraph.getChildNodes(NodeType.ANY, false).getCount());

 for (Node child : (Iterable) children)
     switch (child.getNodeType()) {
         case NodeType.RUN:
             System.out.println("Run contents:");
             System.out.println("\t\"{child.GetText().Trim()}\"");
             break;
         case NodeType.SHAPE:
             Shape childShape = (Shape) child;
             System.out.println("Shape:");
             System.out.println("\t{childShape.ShapeType}, {childShape.Width}x{childShape.Height}");
             break;
     }
 

Returns: int - The corresponding int value.

getDirectRunAttr(int key)

public Object getDirectRunAttr(int key)

Parameters:

ParameterTypeDescription
keyint

Returns: java.lang.Object

getDirectRunAttr(int key, int revisionsView)

public Object getDirectRunAttr(int key, int revisionsView)

Parameters:

ParameterTypeDescription
keyint
revisionsViewint

Returns: java.lang.Object

getDocument()

public DocumentBase getDocument()

Gets the document to which this node belongs.

Remarks:

The node always belongs to a document even if it has just been created and not yet added to the tree, or if it has been removed from the tree.

Examples:

Shows how to create a node and set its owning document.


 Document doc = new Document();
 Paragraph para = new Paragraph(doc);
 para.appendChild(new Run(doc, "Hello world!"));

 // We have not yet appended this paragraph as a child to any composite node.
 Assert.assertNull(para.getParentNode());

 // If a node is an appropriate child node type of another composite node,
 // we can attach it as a child only if both nodes have the same owner document.
 // The owner document is the document we passed to the node's constructor.
 // We have not attached this paragraph to the document, so the document does not contain its text.
 Assert.assertEquals(para.getDocument(), doc);
 Assert.assertEquals("", doc.getText().trim());

 // Since the document owns this paragraph, we can apply one of its styles to the paragraph's contents.
 para.getParagraphFormat().setStyleName("Heading 1");

 // Add this node to the document, and then verify its contents.
 doc.getFirstSection().getBody().appendChild(para);

 Assert.assertEquals(doc.getFirstSection().getBody(), para.getParentNode());
 Assert.assertEquals("Hello world!", doc.getText().trim());
 

Returns: DocumentBase - The document to which this node belongs.

getDocument_IInline()

public DocumentBase getDocument_IInline()

Returns: DocumentBase

getFont()

public Font getFont()

Provides access to the font formatting of this object.

Examples:

Shows how to construct an Aspose.Words document by hand.


 Document doc = new Document();

 // A blank document contains one section, one body and one paragraph.
 // Call the "RemoveAllChildren" method to remove all those nodes,
 // and end up with a document node with no children.
 doc.removeAllChildren();

 // This document now has no composite child nodes that we can add content to.
 // If we wish to edit it, we will need to repopulate its node collection.
 // First, create a new section, and then append it as a child to the root document node.
 Section section = new Section(doc);
 doc.appendChild(section);

 // Set some page setup properties for the section.
 section.getPageSetup().setSectionStart(SectionStart.NEW_PAGE);
 section.getPageSetup().setPaperSize(PaperSize.LETTER);

 // A section needs a body, which will contain and display all its contents
 // on the page between the section's header and footer.
 Body body = new Body(doc);
 section.appendChild(body);

 // Create a paragraph, set some formatting properties, and then append it as a child to the body.
 Paragraph para = new Paragraph(doc);

 para.getParagraphFormat().setStyleName("Heading 1");
 para.getParagraphFormat().setAlignment(ParagraphAlignment.CENTER);

 body.appendChild(para);

 // Finally, add some content to do the document. Create a run,
 // set its appearance and contents, and then append it as a child to the paragraph.
 Run run = new Run(doc);
 run.setText("Hello World!");
 run.getFont().setColor(Color.RED);
 para.appendChild(run);

 Assert.assertEquals("Hello World!", doc.getText().trim());

 doc.save(getArtifactsDir() + "Section.CreateManually.docx");
 

Returns: Font - The corresponding Font value.

getNextSibling()

public Node getNextSibling()

Gets the node immediately following this node.

Remarks:

If there is no next node, a null is returned.

Examples:

Shows how to use a node’s NextSibling property to enumerate through its immediate children.


 Document doc = new Document(getMyDir() + "Paragraphs.docx");

 for (Node node = doc.getFirstSection().getBody().getFirstChild(); node != null; node = node.getNextSibling()) {
     System.out.println(Node.nodeTypeToString(node.getNodeType()));
 }
 

Shows how to traverse a composite node’s tree of child nodes.


 public void recurseChildren() throws Exception {
     Document doc = new Document(getMyDir() + "Paragraphs.docx");

     // Any node that can contain child nodes, such as the document itself, is composite.
     Assert.assertTrue(doc.isComposite());

     // Invoke the recursive function that will go through and print all the child nodes of a composite node.
     traverseAllNodes(doc, 0);
 }

 /// 
 /// Recursively traverses a node tree while printing the type of each node
 /// with an indent depending on depth as well as the contents of all inline nodes.
 /// 
 public void traverseAllNodes(CompositeNode parentNode, int depth) {
     for (Node childNode = parentNode.getFirstChild(); childNode != null; childNode = childNode.getNextSibling()) {
         System.out.println(MessageFormat.format("{0}{1}", String.format("    ", depth), Node.nodeTypeToString(childNode.getNodeType())));

         // Recurse into the node if it is a composite node. Otherwise, print its contents if it is an inline node.
         if (childNode.isComposite()) {
             System.out.println();
             traverseAllNodes((CompositeNode) childNode, depth + 1);
         } else if (childNode instanceof Inline) {
             System.out.println(" - \"{childNode.GetText().Trim()}\"");
         } else {
             System.out.println();
         }
     }
 }
 

Returns: Node - The node immediately following this node.

getNodeType()

public int getNodeType()

Returns NodeType.RUN.

Examples:

Shows how to traverse a composite node’s tree of child nodes.


 public void recurseChildren() throws Exception {
     Document doc = new Document(getMyDir() + "Paragraphs.docx");

     // Any node that can contain child nodes, such as the document itself, is composite.
     Assert.assertTrue(doc.isComposite());

     // Invoke the recursive function that will go through and print all the child nodes of a composite node.
     traverseAllNodes(doc, 0);
 }

 /// 
 /// Recursively traverses a node tree while printing the type of each node
 /// with an indent depending on depth as well as the contents of all inline nodes.
 /// 
 public void traverseAllNodes(CompositeNode parentNode, int depth) {
     for (Node childNode = parentNode.getFirstChild(); childNode != null; childNode = childNode.getNextSibling()) {
         System.out.println(MessageFormat.format("{0}{1}", String.format("    ", depth), Node.nodeTypeToString(childNode.getNodeType())));

         // Recurse into the node if it is a composite node. Otherwise, print its contents if it is an inline node.
         if (childNode.isComposite()) {
             System.out.println();
             traverseAllNodes((CompositeNode) childNode, depth + 1);
         } else if (childNode instanceof Inline) {
             System.out.println(" - \"{childNode.GetText().Trim()}\"");
         } else {
             System.out.println();
         }
     }
 }
 

Returns: int - NodeType.RUN. The returned value is one of NodeType constants.

getParentNode()

public CompositeNode getParentNode()

Gets the immediate parent of this node.

Remarks:

If a node has just been created and not yet added to the tree, or if it has been removed from the tree, the parent is null .

Examples:

Shows how to access a node’s parent node.


 Document doc = new Document();
 Paragraph para = doc.getFirstSection().getBody().getFirstParagraph();

 // Append a child Run node to the document's first paragraph.
 Run run = new Run(doc, "Hello world!");
 para.appendChild(run);

 // The paragraph is the parent node of the run node. We can trace this lineage
 // all the way to the document node, which is the root of the document's node tree.
 Assert.assertEquals(para, run.getParentNode());
 Assert.assertEquals(doc.getFirstSection().getBody(), para.getParentNode());
 Assert.assertEquals(doc.getFirstSection(), doc.getFirstSection().getBody().getParentNode());
 Assert.assertEquals(doc, doc.getFirstSection().getParentNode());
 

Shows how to create a node and set its owning document.


 Document doc = new Document();
 Paragraph para = new Paragraph(doc);
 para.appendChild(new Run(doc, "Hello world!"));

 // We have not yet appended this paragraph as a child to any composite node.
 Assert.assertNull(para.getParentNode());

 // If a node is an appropriate child node type of another composite node,
 // we can attach it as a child only if both nodes have the same owner document.
 // The owner document is the document we passed to the node's constructor.
 // We have not attached this paragraph to the document, so the document does not contain its text.
 Assert.assertEquals(para.getDocument(), doc);
 Assert.assertEquals("", doc.getText().trim());

 // Since the document owns this paragraph, we can apply one of its styles to the paragraph's contents.
 para.getParagraphFormat().setStyleName("Heading 1");

 // Add this node to the document, and then verify its contents.
 doc.getFirstSection().getBody().appendChild(para);

 Assert.assertEquals(doc.getFirstSection().getBody(), para.getParentNode());
 Assert.assertEquals("Hello world!", doc.getText().trim());
 

Returns: CompositeNode - The immediate parent of this node.

getParentParagraph()

public Paragraph getParentParagraph()

Retrieves the parent Paragraph of this node.

Examples:

Shows how to determine the revision type of an inline node.


 Document doc = new Document(getMyDir() + "Revision runs.docx");

 // When we edit the document while the "Track Changes" option, found in via Review -> Tracking,
 // is turned on in Microsoft Word, the changes we apply count as revisions.
 // When editing a document using Aspose.Words, we can begin tracking revisions by
 // invoking the document's "StartTrackRevisions" method and stop tracking by using the "StopTrackRevisions" method.
 // We can either accept revisions to assimilate them into the document
 // or reject them to change the proposed change effectively.
 Assert.assertEquals(6, doc.getRevisions().getCount());

 // The parent node of a revision is the run that the revision concerns. A Run is an Inline node.
 Run run = (Run) doc.getRevisions().get(0).getParentNode();

 Paragraph firstParagraph = run.getParentParagraph();
 RunCollection runs = firstParagraph.getRuns();

 Assert.assertEquals(runs.getCount(), 6);

 // Below are five types of revisions that can flag an Inline node.
 // 1 -  An "insert" revision:
 // This revision occurs when we insert text while tracking changes.
 Assert.assertTrue(runs.get(2).isInsertRevision());

 // 2 -  A "format" revision:
 // This revision occurs when we change the formatting of text while tracking changes.
 Assert.assertTrue(runs.get(2).isFormatRevision());

 // 3 -  A "move from" revision:
 // When we highlight text in Microsoft Word, and then drag it to a different place in the document
 // while tracking changes, two revisions appear.
 // The "move from" revision is a copy of the text originally before we moved it.
 Assert.assertTrue(runs.get(4).isMoveFromRevision());

 // 4 -  A "move to" revision:
 // The "move to" revision is the text that we moved in its new position in the document.
 // "Move from" and "move to" revisions appear in pairs for every move revision we carry out.
 // Accepting a move revision deletes the "move from" revision and its text,
 // and keeps the text from the "move to" revision.
 // Rejecting a move revision conversely keeps the "move from" revision and deletes the "move to" revision.
 Assert.assertTrue(runs.get(1).isMoveToRevision());

 // 5 -  A "delete" revision:
 // This revision occurs when we delete text while tracking changes. When we delete text like this,
 // it will stay in the document as a revision until we either accept the revision,
 // which will delete the text for good, or reject the revision, which will keep the text we deleted where it was.
 Assert.assertTrue(runs.get(5).isDeleteRevision());
 

Returns: Paragraph - The corresponding Paragraph value.

getParentParagraph_IInline()

public Paragraph getParentParagraph_IInline()

Returns: Paragraph

getPhoneticGuide()

public PhoneticGuide getPhoneticGuide()

Gets a getPhoneticGuide() object.

Examples:

Shows how to get properties of the phonetic guide.


 Document doc = new Document(getMyDir() + "Phonetic guide.docx");

 RunCollection runs = doc.getFirstSection().getBody().getFirstParagraph().getRuns();

 // Use phonetic guide in the Asian text.
 Assert.assertEquals(true, runs.get(0).isPhoneticGuide());
 Assert.assertEquals("base", runs.get(0).getPhoneticGuide().getBaseText());
 Assert.assertEquals("ruby", runs.get(0).getPhoneticGuide().getRubyText());
 

Returns: PhoneticGuide - A getPhoneticGuide() object.

getPreviousSibling()

public Node getPreviousSibling()

Gets the node immediately preceding this node.

Remarks:

If there is no preceding node, a null is returned.

Examples:

Shows how to use of methods of Node and CompositeNode to remove a section before the last section in the document.


 Document doc = new Document();
 DocumentBuilder builder = new DocumentBuilder(doc);

 builder.writeln("Section 1 text.");
 builder.insertBreak(BreakType.SECTION_BREAK_CONTINUOUS);
 builder.writeln("Section 2 text.");

 // Both sections are siblings of each other.
 Section lastSection = (Section) doc.getLastChild();
 Section firstSection = (Section) lastSection.getPreviousSibling();

 // Remove a section based on its sibling relationship with another section.
 if (lastSection.getPreviousSibling() != null)
     doc.removeChild(firstSection);

 // The section we removed was the first one, leaving the document with only the second.
 Assert.assertEquals("Section 2 text.", doc.getText().trim());
 

Returns: Node - The node immediately preceding this node.

getRange()

public Range getRange()

Returns a Range object that represents the portion of a document that is contained in this node.

Examples:

Shows how to delete all the nodes from a range.


 Document doc = new Document();
 DocumentBuilder builder = new DocumentBuilder(doc);

 // Add text to the first section in the document, and then add another section.
 builder.write("Section 1. ");
 builder.insertBreak(BreakType.SECTION_BREAK_CONTINUOUS);
 builder.write("Section 2.");

 Assert.assertEquals("Section 1. \fSection 2.", doc.getText().trim());

 // Remove the first section entirely by removing all the nodes
 // within its range, including the section itself.
 doc.getSections().get(0).getRange().delete();

 Assert.assertEquals(1, doc.getSections().getCount());
 Assert.assertEquals("Section 2.", doc.getText().trim());
 

Returns: Range - A Range object that represents the portion of a document that is contained in this node.

getText()

public String getText()

Gets the text of the run.

Examples:

Shows how to construct an Aspose.Words document by hand.


 Document doc = new Document();

 // A blank document contains one section, one body and one paragraph.
 // Call the "RemoveAllChildren" method to remove all those nodes,
 // and end up with a document node with no children.
 doc.removeAllChildren();

 // This document now has no composite child nodes that we can add content to.
 // If we wish to edit it, we will need to repopulate its node collection.
 // First, create a new section, and then append it as a child to the root document node.
 Section section = new Section(doc);
 doc.appendChild(section);

 // Set some page setup properties for the section.
 section.getPageSetup().setSectionStart(SectionStart.NEW_PAGE);
 section.getPageSetup().setPaperSize(PaperSize.LETTER);

 // A section needs a body, which will contain and display all its contents
 // on the page between the section's header and footer.
 Body body = new Body(doc);
 section.appendChild(body);

 // Create a paragraph, set some formatting properties, and then append it as a child to the body.
 Paragraph para = new Paragraph(doc);

 para.getParagraphFormat().setStyleName("Heading 1");
 para.getParagraphFormat().setAlignment(ParagraphAlignment.CENTER);

 body.appendChild(para);

 // Finally, add some content to do the document. Create a run,
 // set its appearance and contents, and then append it as a child to the paragraph.
 Run run = new Run(doc);
 run.setText("Hello World!");
 run.getFont().setColor(Color.RED);
 para.appendChild(run);

 Assert.assertEquals("Hello World!", doc.getText().trim());

 doc.save(getArtifactsDir() + "Section.CreateManually.docx");
 

Returns: java.lang.String - The text of the run.

isComposite()

public boolean isComposite()

Returns true if this node can contain other nodes. (147948,6)

Examples:

Shows how to traverse a composite node’s tree of child nodes.


 public void recurseChildren() throws Exception {
     Document doc = new Document(getMyDir() + "Paragraphs.docx");

     // Any node that can contain child nodes, such as the document itself, is composite.
     Assert.assertTrue(doc.isComposite());

     // Invoke the recursive function that will go through and print all the child nodes of a composite node.
     traverseAllNodes(doc, 0);
 }

 /// 
 /// Recursively traverses a node tree while printing the type of each node
 /// with an indent depending on depth as well as the contents of all inline nodes.
 /// 
 public void traverseAllNodes(CompositeNode parentNode, int depth) {
     for (Node childNode = parentNode.getFirstChild(); childNode != null; childNode = childNode.getNextSibling()) {
         System.out.println(MessageFormat.format("{0}{1}", String.format("    ", depth), Node.nodeTypeToString(childNode.getNodeType())));

         // Recurse into the node if it is a composite node. Otherwise, print its contents if it is an inline node.
         if (childNode.isComposite()) {
             System.out.println();
             traverseAllNodes((CompositeNode) childNode, depth + 1);
         } else if (childNode instanceof Inline) {
             System.out.println(" - \"{childNode.GetText().Trim()}\"");
         } else {
             System.out.println();
         }
     }
 }
 

Returns: boolean - true if this node can contain other nodes.

isDeleteRevision()

public boolean isDeleteRevision()

Returns true if this object was deleted in Microsoft Word while change tracking was enabled.

Examples:

Shows how to determine the revision type of an inline node.


 Document doc = new Document(getMyDir() + "Revision runs.docx");

 // When we edit the document while the "Track Changes" option, found in via Review -> Tracking,
 // is turned on in Microsoft Word, the changes we apply count as revisions.
 // When editing a document using Aspose.Words, we can begin tracking revisions by
 // invoking the document's "StartTrackRevisions" method and stop tracking by using the "StopTrackRevisions" method.
 // We can either accept revisions to assimilate them into the document
 // or reject them to change the proposed change effectively.
 Assert.assertEquals(6, doc.getRevisions().getCount());

 // The parent node of a revision is the run that the revision concerns. A Run is an Inline node.
 Run run = (Run) doc.getRevisions().get(0).getParentNode();

 Paragraph firstParagraph = run.getParentParagraph();
 RunCollection runs = firstParagraph.getRuns();

 Assert.assertEquals(runs.getCount(), 6);

 // Below are five types of revisions that can flag an Inline node.
 // 1 -  An "insert" revision:
 // This revision occurs when we insert text while tracking changes.
 Assert.assertTrue(runs.get(2).isInsertRevision());

 // 2 -  A "format" revision:
 // This revision occurs when we change the formatting of text while tracking changes.
 Assert.assertTrue(runs.get(2).isFormatRevision());

 // 3 -  A "move from" revision:
 // When we highlight text in Microsoft Word, and then drag it to a different place in the document
 // while tracking changes, two revisions appear.
 // The "move from" revision is a copy of the text originally before we moved it.
 Assert.assertTrue(runs.get(4).isMoveFromRevision());

 // 4 -  A "move to" revision:
 // The "move to" revision is the text that we moved in its new position in the document.
 // "Move from" and "move to" revisions appear in pairs for every move revision we carry out.
 // Accepting a move revision deletes the "move from" revision and its text,
 // and keeps the text from the "move to" revision.
 // Rejecting a move revision conversely keeps the "move from" revision and deletes the "move to" revision.
 Assert.assertTrue(runs.get(1).isMoveToRevision());

 // 5 -  A "delete" revision:
 // This revision occurs when we delete text while tracking changes. When we delete text like this,
 // it will stay in the document as a revision until we either accept the revision,
 // which will delete the text for good, or reject the revision, which will keep the text we deleted where it was.
 Assert.assertTrue(runs.get(5).isDeleteRevision());
 

Returns: boolean - True if this object was deleted in Microsoft Word while change tracking was enabled.

isFormatRevision()

public boolean isFormatRevision()

Returns true if formatting of the object was changed in Microsoft Word while change tracking was enabled.

Examples:

Shows how to determine the revision type of an inline node.


 Document doc = new Document(getMyDir() + "Revision runs.docx");

 // When we edit the document while the "Track Changes" option, found in via Review -> Tracking,
 // is turned on in Microsoft Word, the changes we apply count as revisions.
 // When editing a document using Aspose.Words, we can begin tracking revisions by
 // invoking the document's "StartTrackRevisions" method and stop tracking by using the "StopTrackRevisions" method.
 // We can either accept revisions to assimilate them into the document
 // or reject them to change the proposed change effectively.
 Assert.assertEquals(6, doc.getRevisions().getCount());

 // The parent node of a revision is the run that the revision concerns. A Run is an Inline node.
 Run run = (Run) doc.getRevisions().get(0).getParentNode();

 Paragraph firstParagraph = run.getParentParagraph();
 RunCollection runs = firstParagraph.getRuns();

 Assert.assertEquals(runs.getCount(), 6);

 // Below are five types of revisions that can flag an Inline node.
 // 1 -  An "insert" revision:
 // This revision occurs when we insert text while tracking changes.
 Assert.assertTrue(runs.get(2).isInsertRevision());

 // 2 -  A "format" revision:
 // This revision occurs when we change the formatting of text while tracking changes.
 Assert.assertTrue(runs.get(2).isFormatRevision());

 // 3 -  A "move from" revision:
 // When we highlight text in Microsoft Word, and then drag it to a different place in the document
 // while tracking changes, two revisions appear.
 // The "move from" revision is a copy of the text originally before we moved it.
 Assert.assertTrue(runs.get(4).isMoveFromRevision());

 // 4 -  A "move to" revision:
 // The "move to" revision is the text that we moved in its new position in the document.
 // "Move from" and "move to" revisions appear in pairs for every move revision we carry out.
 // Accepting a move revision deletes the "move from" revision and its text,
 // and keeps the text from the "move to" revision.
 // Rejecting a move revision conversely keeps the "move from" revision and deletes the "move to" revision.
 Assert.assertTrue(runs.get(1).isMoveToRevision());

 // 5 -  A "delete" revision:
 // This revision occurs when we delete text while tracking changes. When we delete text like this,
 // it will stay in the document as a revision until we either accept the revision,
 // which will delete the text for good, or reject the revision, which will keep the text we deleted where it was.
 Assert.assertTrue(runs.get(5).isDeleteRevision());
 

Returns: boolean - True if formatting of the object was changed in Microsoft Word while change tracking was enabled.

isInsertRevision()

public boolean isInsertRevision()

Returns true if this object was inserted in Microsoft Word while change tracking was enabled.

Examples:

Shows how to determine the revision type of an inline node.


 Document doc = new Document(getMyDir() + "Revision runs.docx");

 // When we edit the document while the "Track Changes" option, found in via Review -> Tracking,
 // is turned on in Microsoft Word, the changes we apply count as revisions.
 // When editing a document using Aspose.Words, we can begin tracking revisions by
 // invoking the document's "StartTrackRevisions" method and stop tracking by using the "StopTrackRevisions" method.
 // We can either accept revisions to assimilate them into the document
 // or reject them to change the proposed change effectively.
 Assert.assertEquals(6, doc.getRevisions().getCount());

 // The parent node of a revision is the run that the revision concerns. A Run is an Inline node.
 Run run = (Run) doc.getRevisions().get(0).getParentNode();

 Paragraph firstParagraph = run.getParentParagraph();
 RunCollection runs = firstParagraph.getRuns();

 Assert.assertEquals(runs.getCount(), 6);

 // Below are five types of revisions that can flag an Inline node.
 // 1 -  An "insert" revision:
 // This revision occurs when we insert text while tracking changes.
 Assert.assertTrue(runs.get(2).isInsertRevision());

 // 2 -  A "format" revision:
 // This revision occurs when we change the formatting of text while tracking changes.
 Assert.assertTrue(runs.get(2).isFormatRevision());

 // 3 -  A "move from" revision:
 // When we highlight text in Microsoft Word, and then drag it to a different place in the document
 // while tracking changes, two revisions appear.
 // The "move from" revision is a copy of the text originally before we moved it.
 Assert.assertTrue(runs.get(4).isMoveFromRevision());

 // 4 -  A "move to" revision:
 // The "move to" revision is the text that we moved in its new position in the document.
 // "Move from" and "move to" revisions appear in pairs for every move revision we carry out.
 // Accepting a move revision deletes the "move from" revision and its text,
 // and keeps the text from the "move to" revision.
 // Rejecting a move revision conversely keeps the "move from" revision and deletes the "move to" revision.
 Assert.assertTrue(runs.get(1).isMoveToRevision());

 // 5 -  A "delete" revision:
 // This revision occurs when we delete text while tracking changes. When we delete text like this,
 // it will stay in the document as a revision until we either accept the revision,
 // which will delete the text for good, or reject the revision, which will keep the text we deleted where it was.
 Assert.assertTrue(runs.get(5).isDeleteRevision());
 

Returns: boolean - True if this object was inserted in Microsoft Word while change tracking was enabled.

isMoveFromRevision()

public boolean isMoveFromRevision()

Returns true if this object was moved (deleted) in Microsoft Word while change tracking was enabled.

Examples:

Shows how to determine the revision type of an inline node.


 Document doc = new Document(getMyDir() + "Revision runs.docx");

 // When we edit the document while the "Track Changes" option, found in via Review -> Tracking,
 // is turned on in Microsoft Word, the changes we apply count as revisions.
 // When editing a document using Aspose.Words, we can begin tracking revisions by
 // invoking the document's "StartTrackRevisions" method and stop tracking by using the "StopTrackRevisions" method.
 // We can either accept revisions to assimilate them into the document
 // or reject them to change the proposed change effectively.
 Assert.assertEquals(6, doc.getRevisions().getCount());

 // The parent node of a revision is the run that the revision concerns. A Run is an Inline node.
 Run run = (Run) doc.getRevisions().get(0).getParentNode();

 Paragraph firstParagraph = run.getParentParagraph();
 RunCollection runs = firstParagraph.getRuns();

 Assert.assertEquals(runs.getCount(), 6);

 // Below are five types of revisions that can flag an Inline node.
 // 1 -  An "insert" revision:
 // This revision occurs when we insert text while tracking changes.
 Assert.assertTrue(runs.get(2).isInsertRevision());

 // 2 -  A "format" revision:
 // This revision occurs when we change the formatting of text while tracking changes.
 Assert.assertTrue(runs.get(2).isFormatRevision());

 // 3 -  A "move from" revision:
 // When we highlight text in Microsoft Word, and then drag it to a different place in the document
 // while tracking changes, two revisions appear.
 // The "move from" revision is a copy of the text originally before we moved it.
 Assert.assertTrue(runs.get(4).isMoveFromRevision());

 // 4 -  A "move to" revision:
 // The "move to" revision is the text that we moved in its new position in the document.
 // "Move from" and "move to" revisions appear in pairs for every move revision we carry out.
 // Accepting a move revision deletes the "move from" revision and its text,
 // and keeps the text from the "move to" revision.
 // Rejecting a move revision conversely keeps the "move from" revision and deletes the "move to" revision.
 Assert.assertTrue(runs.get(1).isMoveToRevision());

 // 5 -  A "delete" revision:
 // This revision occurs when we delete text while tracking changes. When we delete text like this,
 // it will stay in the document as a revision until we either accept the revision,
 // which will delete the text for good, or reject the revision, which will keep the text we deleted where it was.
 Assert.assertTrue(runs.get(5).isDeleteRevision());
 

Returns: boolean - true if this object was moved (deleted) in Microsoft Word while change tracking was enabled.

isMoveToRevision()

public boolean isMoveToRevision()

Returns true if this object was moved (inserted) in Microsoft Word while change tracking was enabled.

Examples:

Shows how to determine the revision type of an inline node.


 Document doc = new Document(getMyDir() + "Revision runs.docx");

 // When we edit the document while the "Track Changes" option, found in via Review -> Tracking,
 // is turned on in Microsoft Word, the changes we apply count as revisions.
 // When editing a document using Aspose.Words, we can begin tracking revisions by
 // invoking the document's "StartTrackRevisions" method and stop tracking by using the "StopTrackRevisions" method.
 // We can either accept revisions to assimilate them into the document
 // or reject them to change the proposed change effectively.
 Assert.assertEquals(6, doc.getRevisions().getCount());

 // The parent node of a revision is the run that the revision concerns. A Run is an Inline node.
 Run run = (Run) doc.getRevisions().get(0).getParentNode();

 Paragraph firstParagraph = run.getParentParagraph();
 RunCollection runs = firstParagraph.getRuns();

 Assert.assertEquals(runs.getCount(), 6);

 // Below are five types of revisions that can flag an Inline node.
 // 1 -  An "insert" revision:
 // This revision occurs when we insert text while tracking changes.
 Assert.assertTrue(runs.get(2).isInsertRevision());

 // 2 -  A "format" revision:
 // This revision occurs when we change the formatting of text while tracking changes.
 Assert.assertTrue(runs.get(2).isFormatRevision());

 // 3 -  A "move from" revision:
 // When we highlight text in Microsoft Word, and then drag it to a different place in the document
 // while tracking changes, two revisions appear.
 // The "move from" revision is a copy of the text originally before we moved it.
 Assert.assertTrue(runs.get(4).isMoveFromRevision());

 // 4 -  A "move to" revision:
 // The "move to" revision is the text that we moved in its new position in the document.
 // "Move from" and "move to" revisions appear in pairs for every move revision we carry out.
 // Accepting a move revision deletes the "move from" revision and its text,
 // and keeps the text from the "move to" revision.
 // Rejecting a move revision conversely keeps the "move from" revision and deletes the "move to" revision.
 Assert.assertTrue(runs.get(1).isMoveToRevision());

 // 5 -  A "delete" revision:
 // This revision occurs when we delete text while tracking changes. When we delete text like this,
 // it will stay in the document as a revision until we either accept the revision,
 // which will delete the text for good, or reject the revision, which will keep the text we deleted where it was.
 Assert.assertTrue(runs.get(5).isDeleteRevision());
 

Returns: boolean - true if this object was moved (inserted) in Microsoft Word while change tracking was enabled.

isPhoneticGuide()

public boolean isPhoneticGuide()

Gets a boolean value indicating either the run is a phonetic guide.

Examples:

Shows how to get properties of the phonetic guide.


 Document doc = new Document(getMyDir() + "Phonetic guide.docx");

 RunCollection runs = doc.getFirstSection().getBody().getFirstParagraph().getRuns();

 // Use phonetic guide in the Asian text.
 Assert.assertEquals(true, runs.get(0).isPhoneticGuide());
 Assert.assertEquals("base", runs.get(0).getPhoneticGuide().getBaseText());
 Assert.assertEquals("ruby", runs.get(0).getPhoneticGuide().getRubyText());
 

Returns: boolean - A boolean value indicating either the run is a phonetic guide.

nextPreOrder(Node rootNode)

public Node nextPreOrder(Node rootNode)

Gets next node according to the pre-order tree traversal algorithm.

Examples:

Shows how to traverse the document’s node tree using the pre-order traversal algorithm, and delete any encountered shape with an image.


 Document doc = new Document(getMyDir() + "Images.docx");
 ArrayList shapes = (ArrayList) IterableUtils.toList(doc.getChildNodes(NodeType.SHAPE, true));

 Assert.assertEquals(9, IterableUtils.countMatches(shapes, s -> {
     try {
         return s.hasImage();
     } catch (Exception e) {
         e.printStackTrace();
     }
     return false;
 }));

 Node curNode = doc;
 while (curNode != null) {
     Node nextNode = curNode.nextPreOrder(doc);

     if (curNode.previousPreOrder(doc) != null && nextNode != null)
         Assert.assertEquals(curNode, nextNode.previousPreOrder(doc));

     if (curNode.getNodeType() == NodeType.SHAPE && ((Shape) curNode).hasImage())
         curNode.remove();

     curNode = nextNode;
 }

 shapes = (ArrayList) IterableUtils.toList(doc.getChildNodes(NodeType.SHAPE, true));

 Assert.assertEquals(0, IterableUtils.countMatches(shapes, s -> {
     try {
         return s.hasImage();
     } catch (Exception e) {
         e.printStackTrace();
     }
     return false;
 }));
 

Parameters:

ParameterTypeDescription
rootNodeNodeThe top node (limit) of traversal.

Returns: Node - Next node in pre-order order. Null if reached the rootNode .

nodeTypeToString(int nodeType)

public static String nodeTypeToString(int nodeType)

Parameters:

ParameterTypeDescription
nodeTypeint

Returns: java.lang.String

previousPreOrder(Node rootNode)

public Node previousPreOrder(Node rootNode)

Gets the previous node according to the pre-order tree traversal algorithm.

Examples:

Shows how to traverse the document’s node tree using the pre-order traversal algorithm, and delete any encountered shape with an image.


 Document doc = new Document(getMyDir() + "Images.docx");
 ArrayList shapes = (ArrayList) IterableUtils.toList(doc.getChildNodes(NodeType.SHAPE, true));

 Assert.assertEquals(9, IterableUtils.countMatches(shapes, s -> {
     try {
         return s.hasImage();
     } catch (Exception e) {
         e.printStackTrace();
     }
     return false;
 }));

 Node curNode = doc;
 while (curNode != null) {
     Node nextNode = curNode.nextPreOrder(doc);

     if (curNode.previousPreOrder(doc) != null && nextNode != null)
         Assert.assertEquals(curNode, nextNode.previousPreOrder(doc));

     if (curNode.getNodeType() == NodeType.SHAPE && ((Shape) curNode).hasImage())
         curNode.remove();

     curNode = nextNode;
 }

 shapes = (ArrayList) IterableUtils.toList(doc.getChildNodes(NodeType.SHAPE, true));

 Assert.assertEquals(0, IterableUtils.countMatches(shapes, s -> {
     try {
         return s.hasImage();
     } catch (Exception e) {
         e.printStackTrace();
     }
     return false;
 }));
 

Parameters:

ParameterTypeDescription
rootNodeNodeThe top node (limit) of traversal.

Returns: Node - Previous node in pre-order order. Null if reached the rootNode .

remove()

public void remove()

Removes itself from the parent.

Examples:

Shows how to remove all child nodes of a specific type from a composite node.


 Document doc = new Document(getMyDir() + "Tables.docx");

 Assert.assertEquals(2, doc.getChildNodes(NodeType.TABLE, true).getCount());

 Node curNode = doc.getFirstSection().getBody().getFirstChild();

 while (curNode != null) {
     // Save the next sibling node as a variable in case we want to move to it after deleting this node.
     Node nextNode = curNode.getNextSibling();

     // A section body can contain Paragraph and Table nodes.
     // If the node is a Table, remove it from the parent.
     if (curNode.getNodeType() == NodeType.TABLE) {
         curNode.remove();
     }

     curNode = nextNode;
 }

 Assert.assertEquals(0, doc.getChildNodes(NodeType.TABLE, true).getCount());
 

Shows how to delete all shapes with images from a document.


 Document doc = new Document(getMyDir() + "Images.docx");
 ArrayList shapes = (ArrayList) IterableUtils.toList(doc.getChildNodes(NodeType.SHAPE, true));

 Assert.assertEquals(9, IterableUtils.countMatches(shapes, s -> {
     try {
         return s.hasImage();
     } catch (Exception e) {
         e.printStackTrace();
     }
     return false;
 }));

 for (Shape shape : shapes)
     if (shape.hasImage())
         shape.remove();

 shapes = (ArrayList) IterableUtils.toList(doc.getChildNodes(NodeType.SHAPE, true));

 Assert.assertEquals(0, IterableUtils.countMatches(shapes, s -> {
     try {
         return s.hasImage();
     } catch (Exception e) {
         e.printStackTrace();
     }
     return false;
 }));
 

removeMoveRevisions()

public void removeMoveRevisions()

removeRunAttr(int key)

public void removeRunAttr(int key)

Parameters:

ParameterTypeDescription
keyint

setCustomNodeId(int value)

public void setCustomNodeId(int value)

Specifies custom node identifier.

Remarks:

Default is zero.

This identifier can be set and used arbitrarily. For example, as a key to get external data.

Important note, specified value is not saved to an output file and exists only during the node lifetime.

Examples:

Shows how to traverse through a composite node’s collection of child nodes.


 Document doc = new Document();

 // Add two runs and one shape as child nodes to the first paragraph of this document.
 Paragraph paragraph = (Paragraph) doc.getChild(NodeType.PARAGRAPH, 0, true);
 paragraph.appendChild(new Run(doc, "Hello world! "));

 Shape shape = new Shape(doc, ShapeType.RECTANGLE);
 shape.setWidth(200.0);
 shape.setHeight(200.0);
 // Note that the 'CustomNodeId' is not saved to an output file and exists only during the node lifetime.
 shape.setCustomNodeId(100);
 shape.setWrapType(WrapType.INLINE);
 paragraph.appendChild(shape);

 paragraph.appendChild(new Run(doc, "Hello again!"));

 // Iterate through the paragraph's collection of immediate children,
 // and print any runs or shapes that we find within.
 NodeCollection children = paragraph.getChildNodes(NodeType.ANY, false);

 Assert.assertEquals(3, paragraph.getChildNodes(NodeType.ANY, false).getCount());

 for (Node child : (Iterable) children)
     switch (child.getNodeType()) {
         case NodeType.RUN:
             System.out.println("Run contents:");
             System.out.println("\t\"{child.GetText().Trim()}\"");
             break;
         case NodeType.SHAPE:
             Shape childShape = (Shape) child;
             System.out.println("Shape:");
             System.out.println("\t{childShape.ShapeType}, {childShape.Width}x{childShape.Height}");
             break;
     }
 

Parameters:

ParameterTypeDescription
valueintThe corresponding int value.

setRunAttr(int key, Object value)

public void setRunAttr(int key, Object value)

Parameters:

ParameterTypeDescription
keyint
valuejava.lang.Object

setText(String value)

public void setText(String value)

Sets the text of the run.

Examples:

Shows how to construct an Aspose.Words document by hand.


 Document doc = new Document();

 // A blank document contains one section, one body and one paragraph.
 // Call the "RemoveAllChildren" method to remove all those nodes,
 // and end up with a document node with no children.
 doc.removeAllChildren();

 // This document now has no composite child nodes that we can add content to.
 // If we wish to edit it, we will need to repopulate its node collection.
 // First, create a new section, and then append it as a child to the root document node.
 Section section = new Section(doc);
 doc.appendChild(section);

 // Set some page setup properties for the section.
 section.getPageSetup().setSectionStart(SectionStart.NEW_PAGE);
 section.getPageSetup().setPaperSize(PaperSize.LETTER);

 // A section needs a body, which will contain and display all its contents
 // on the page between the section's header and footer.
 Body body = new Body(doc);
 section.appendChild(body);

 // Create a paragraph, set some formatting properties, and then append it as a child to the body.
 Paragraph para = new Paragraph(doc);

 para.getParagraphFormat().setStyleName("Heading 1");
 para.getParagraphFormat().setAlignment(ParagraphAlignment.CENTER);

 body.appendChild(para);

 // Finally, add some content to do the document. Create a run,
 // set its appearance and contents, and then append it as a child to the paragraph.
 Run run = new Run(doc);
 run.setText("Hello World!");
 run.getFont().setColor(Color.RED);
 para.appendChild(run);

 Assert.assertEquals("Hello World!", doc.getText().trim());

 doc.save(getArtifactsDir() + "Section.CreateManually.docx");
 

Parameters:

ParameterTypeDescription
valuejava.lang.StringThe text of the run.

toString()

public String toString()

Returns: java.lang.String

toString(SaveOptions saveOptions)

public String toString(SaveOptions saveOptions)

Exports the content of the node into a string using the specified save options.

Examples:

Exports the content of a node to String in HTML format.


 Document doc = new Document(getMyDir() + "Document.docx");

 Node node = doc.getLastSection().getBody().getLastParagraph();

 // When we call the ToString method using the html SaveFormat overload,
 // it converts the node's contents to their raw html representation.
 Assert.assertEquals(" " +
         "Hello World!" +
         "", node.toString(SaveFormat.HTML));

 // We can also modify the result of this conversion using a SaveOptions object.
 HtmlSaveOptions saveOptions = new HtmlSaveOptions();
 saveOptions.setExportRelativeFontSize(true);

 Assert.assertEquals(" " +
         "Hello World!" +
         "", node.toString(saveOptions));
 

Parameters:

ParameterTypeDescription
saveOptionsSaveOptionsSpecifies the options that control how the node is saved.

Returns: java.lang.String - The content of the node in the specified format.

toString(int saveFormat)

public String toString(int saveFormat)

Parameters:

ParameterTypeDescription
saveFormatint

Returns: java.lang.String