ExifProperties

Inheritance: java.lang.Object, com.aspose.ms.System.ValueType, com.aspose.ms.System.Enum

public final class ExifProperties extends System.Enum

Exif tags list

Fields

FieldDescription
ApertureValueThe lens aperture value.
ArtistThis tag records the name of the camera owner, photographer or image creator.
BitsPerSampleThe number of bits per image component.
BodySerialNumberContains camera body serial number
BrightnessValueThe brightness value.
CFAPatternIndicates the color filter array (CFA) geometric pattern of the image sensor when a one-chip color area sensor is used.
CameraOwnerNameContains camera owner name
ColorSpaceThe color space information tag (ColorSpace) is always recorded as the color space specifier.
ComponentsConfigurationThe components configuration.
CompressedBitsPerPixelSpecific to compressed data; states the compressed bits per pixel.
CompressionThe compression scheme used for the image data.
ContrastThis tag indicates the direction of contrast processing applied by the camera when the image was shot.
CopyrightCopyright information.
CustomRenderedThis tag indicates the use of special processing on image data, such as rendering geared to output.
DateTimeThe date and time of image creation.
DateTimeDigitizedThe date time digitized.
DateTimeOriginalThe date and time when the original image data was generated.
DeviceSettingDescriptionThis tag indicates information on the picture-taking conditions of a particular camera model.
DigitalZoomRatioThis tag indicates the digital zoom ratio when the image was shot.
EnumSeparatorCharArray
ExifIfdPointerA pointer to the Exif IFD.
ExifVersionThe exif version.
ExposureBiasValueThe exposure bias value.
ExposureIndexIndicates the exposure index selected on the camera or input device at the time the image is captured.
ExposureModeThis tag indicates the exposure mode set when the image was shot.
ExposureProgramThe class of the program used by the camera to set exposure when the picture is taken.
ExposureTimeExposure time, given in seconds.
FNumberThe F number.
FileSourceThe file source.
FlashIndicates the status of flash when the image was shot.
FlashEnergyIndicates the strobe energy at the time the image is captured, as measured in Beam Candle Power Seconds(BCPS).
FlashpixVersionThe Flashpix format version supported by a FPXR file.
FocalLengthThe actual focal length of the lens, in mm.
FocalLengthIn35MmFilmThis tag indicates the equivalent focal length assuming a 35mm film camera, in mm.
FocalPlaneResolutionUnitIndicates the unit for measuring FocalPlaneXResolution and FocalPlaneYResolution.
FocalPlaneXResolutionIndicates the number of pixels in the image width (X) direction per FocalPlaneResolutionUnit on the camera focal plane.
FocalPlaneYResolutionIndicates the number of pixels in the image height (Y) direction per FocalPlaneResolutionUnit on the camera focal plane.
GPSAltitudeIndicates the altitude based on the reference in GPSAltitudeRef.
GPSAltitudeRefIndicates the altitude used as the reference altitude.
GPSAreaInformationA character string recording the name of the GPS area.
GPSDOPIndicates the GPS DOP (data degree of precision).
GPSDateStampA character string recording date and time information relative to UTC (Coordinated Universal Time).
GPSDestBearingIndicates the bearing to the destination point.
GPSDestBearingRefIndicates the reference used for giving the bearing to the destination point.
GPSDestDistanceIndicates the distance to the destination point.
GPSDestDistanceRefIndicates the unit used to express the distance to the destination point.
GPSDestLatitudeIndicates the latitude of the destination point.
GPSDestLatitudeRefIndicates whether the latitude of the destination point is north or south latitude.
GPSDestLongitudeIndicates the longitude of the destination point.
GPSDestLongitudeRefIndicates whether the longitude of the destination point is east or west longitude.
GPSDifferentialIndicates whether differential correction is applied to the GPS receiver.
GPSIfdPointerThe gps ifd pointer.
GPSImgDirectionIndicates the direction of the image when it was captured.
GPSImgDirectionRefIndicates the reference for giving the direction of the image when it is captured.
GPSLatitudeIndicates the latitude.
GPSLatitudeRefIndicates whether the latitude is north or south latitude.
GPSLongitudeIndicates the longitude.
GPSLongitudeRefIndicates whether the longitude is east or west longitude.
GPSMapDatumIndicates the geodetic survey data used by the GPS receiver.
GPSMeasureModeIndicates the GPS measurement mode.
GPSProcessingMethodA character string recording the name of the method used for location finding.
GPSSatellitesIndicates the GPS satellites used for measurements.
GPSSpeedIndicates the speed of GPS receiver movement.
GPSSpeedRefIndicates the unit used to express the GPS receiver speed of movement.
GPSStatusIndicates the status of the GPS receiver when the image is recorded.
GPSTimestampIndicates the time as UTC (Coordinated Universal Time).
GPSTrackIndicates the direction of GPS receiver movement.
GPSTrackRefIndicates the reference for giving the direction of GPS receiver movement.
GPSVersionIDIndicates the version of GPSInfoIFD.
GainControlThis tag indicates the degree of overall image gain adjustment.
GammaGamma value
ISOSpeedInformation about iso speed value as defined in ISO 12232
ISOSpeedLatitudeYYYThis tag indicates ISO speed latitude yyy value as defined in ISO 12232
ISOSpeedLatitudeZZZThis tag indicates ISO speed latitude zzz value as defined in ISO 12232
ImageDescriptionA character string giving the title of the image.
ImageLengthThe number of rows of image data.
ImageUniqueIDThe image unique id.
ImageWidthThe number of columns of image data, equal to the number of pixels per row.
JPEGInterchangeFormatThe offset to the start byte (SOI) of JPEG compressed thumbnail data.
JPEGInterchangeFormatLengthThe number of bytes of JPEG compressed thumbnail data.
LensMakeThis tag records lens manufacturer
LensModelThis tag records lenss model name and model number
LensSerialNumberThis tag records the serial number of interchangable lens
LensSpecificationThis tag notes minimum focal length, maximum focal length, minimum F number in the minimum focal length and minimum F number in maximum focal length
LightSourceThe kind light source.
MakeThe manufacturer of the recording equipment.
MakerNoteA tag for manufacturers of Exif writers to record any desired information.
MaxApertureValueThe max aperture value.
MeteringModeThe metering mode.
ModelThe model name or model number of the equipment.
OECFIndicates the Opto-Electric Conversion Function (OECF) specified in ISO 14524.
OrientationThe image orientation viewed in terms of rows and columns.
PhotographicSensitivityIndicates the ISO Speed and ISO Latitude of the camera or input device as specified in ISO 12232.
PhotometricInterpretationThe pixel composition.
PixelXDimensionInformation specific to compressed data.
PixelYDimensionInformation specific to compressed data.
PlanarConfigurationIndicates whether pixel components are recorded in a chunky or planar format.
PrimaryChromaticitiesThe chromaticity of the three primary colors of the image.
RecommendedExposureIndexIndicates recommended exposure index
ReferenceBlackWhiteThe reference black point value and reference white point value.
RelatedSoundFileThe related sound file.
ResolutionUnitThe unit for measuring XResolution and YResolution.
RowsPerStripThe number of rows per strip.
SamplesPerPixelThe number of components per pixel.
SaturationThis tag indicates the direction of saturation processing applied by the camera when the image was shot.
SceneCaptureTypeThis tag indicates the type of scene that was shot.
SceneTypeIndicates the type of scene.
SensingMethodIndicates the image sensor type on the camera or input device.
SensitivityTypeType of photographic sensitivity
SharpnessThis tag indicates the direction of sharpness processing applied by the camera when the image was shot
ShutterSpeedValueThe shutter speed value.
SoftwareThis tag records the name and version of the software or firmware of the camera or image input device used to generate the image.
SpatialFrequencyResponseThis tag records the camera or input device spatial frequency table and SFR values in the direction of image width, image height, and diagonal direction, as specified in ISO 12233.
SpectralSensitivityIndicates the spectral sensitivity of each channel of the camera used.
StandardOutputSensitivityIndicates standard output sensitivity of camera
StripByteCountsThe total number of bytes in each strip.
StripOffsetsFor each strip, the byte offset of that strip.
SubjectAreaThis tag indicates the location and area of the main subject in the overall scene.
SubjectDistanceThe distance to the subject, given in meters.
SubjectDistanceRangeThis tag indicates the distance to the subject.
SubjectLocationIndicates the location of the main subject in the scene.
SubsecTimeA tag used to record fractions of seconds for the DateTime tag.
SubsecTimeDigitizedA tag used to record fractions of seconds for the DateTimeDigitized tag.
SubsecTimeOriginalA tag used to record fractions of seconds for the DateTimeOriginal tag.
TransferFunctionA transfer function for the image, described in tabular style.
UserCommentA tag for Exif users to write keywords or comments on the image besides those in ImageDescription, and without the character code limitations of the ImageDescription tag.
WhiteBalanceThis tag indicates the white balance mode set when the image was shot.
WhitePointThe chromaticity of the white point of the image.
XResolutionThe number of pixels per ResolutionUnit in the ImageWidth direction.
YCbCrCoefficientsThe matrix coefficients for transformation from RGB to YCbCr image data.
YCbCrPositioningThe position of chrominance components in relation to the luminance component.
YCbCrSubSamplingThe sampling ratio of chrominance components in relation to the luminance component.
YResolutionThe number of pixels per ResolutionUnit in the ImageLength direction.

Methods

MethodDescription
Clone()
CloneTo(T arg0)
CloneTo(System.Enum arg0)
equals(Object arg0)
format(System.Type arg0, Object arg1, String arg2)
format(Class arg0, long arg1, String arg2)
getClass()
getName(System.Type arg0, Object arg1)
getName(Class arg0, long arg1)
getNames()
getNames(System.Type arg0)
getNames(Class arg0)
getUnderlyingType(System.Type arg0)
getUnderlyingType(Class arg0)
getValue(Class arg0, String arg1)
getValues()
getValues(System.Type arg0)
getValues(Class arg0)
get_Caption()
get_Value()
hashCode()
isDefined(System.Type arg0, Object arg1)
isDefined(System.Type arg0, String arg1)
isDefined(System.Type arg0, long arg1)
isDefined(Class arg0, long arg1)
notify()
notifyAll()
parse(System.Type arg0, String arg1)
parse(System.Type arg0, String arg1, Boolean arg2)
parse(Class arg0, String arg1)
parse(Class arg0, String arg1, Boolean arg2)
register(System.Enum.AbstractEnum arg0)
toObject(System.Type arg0, Object arg1)
toString()
toString(Class arg0, long arg1)
wait()
wait(long arg0)
wait(long arg0, int arg1)

ApertureValue

public static final int ApertureValue

The lens aperture value.

Artist

public static final int Artist

This tag records the name of the camera owner, photographer or image creator. The detailed format is not specified, but it is recommended that the information be written as in the example below for ease of Interoperability. When the field is left blank, it is treated as unknown. Ex.) “Camera owner, John Smith; Photographer, Michael Brown; Image creator, Ken James”

BitsPerSample

public static final int BitsPerSample

The number of bits per image component. In this standard each component of the image is 8 bits, so the value for this tag is 8.

BodySerialNumber

public static final int BodySerialNumber

Contains camera body serial number

BrightnessValue

public static final int BrightnessValue

The brightness value.

CFAPattern

public static final int CFAPattern

Indicates the color filter array (CFA) geometric pattern of the image sensor when a one-chip color area sensor is used. It does not apply to all sensing methods.

CameraOwnerName

public static final int CameraOwnerName

Contains camera owner name

ColorSpace

public static final int ColorSpace

The color space information tag (ColorSpace) is always recorded as the color space specifier.

ComponentsConfiguration

public static final int ComponentsConfiguration

The components configuration.

CompressedBitsPerPixel

public static final int CompressedBitsPerPixel

Specific to compressed data; states the compressed bits per pixel.

Compression

public static final int Compression

The compression scheme used for the image data. When a primary image is JPEG compressed, this designation is not necessary and is omitted.

Contrast

public static final int Contrast

This tag indicates the direction of contrast processing applied by the camera when the image was shot.

public static final int Copyright

Copyright information. In this standard the tag is used to indicate both the photographer and editor copyrights. It is the copyright notice of the person or organization claiming rights to the image. The Interoperability copyright statement including date and rights should be written in this field; e.g., “Copyright, John Smith, 19xx. All rights reserved.”. In this standard the field records both the photographer and editor copyrights, with each recorded in a separate part of the statement. When there is a clear distinction between the photographer and editor copyrights, these are to be written in the order of photographer followed by editor copyright, separated by NULL (in this case since the statement also ends with a NULL, there are two NULL codes). When only the photographer copyright is given, it is terminated by one NULL code . When only the editor copyright is given, the photographer copyright part consists of one space followed by a terminating NULL code, then the editor copyright is given. When the field is left blank, it is treated as unknown.

CustomRendered

public static final int CustomRendered

This tag indicates the use of special processing on image data, such as rendering geared to output. When special processing is performed, the reader is expected to disable or minimize any further processing.

DateTime

public static final int DateTime

The date and time of image creation. In Exif standard, it is the date and time the file was changed.

DateTimeDigitized

public static final int DateTimeDigitized

The date time digitized.

DateTimeOriginal

public static final int DateTimeOriginal

The date and time when the original image data was generated.

DeviceSettingDescription

public static final int DeviceSettingDescription

This tag indicates information on the picture-taking conditions of a particular camera model. The tag is used only to indicate the picture-taking conditions in the reader.

DigitalZoomRatio

public static final int DigitalZoomRatio

This tag indicates the digital zoom ratio when the image was shot. If the numerator of the recorded value is 0, this indicates that digital zoom was not used.

EnumSeparatorCharArray

public static final char[] EnumSeparatorCharArray

ExifIfdPointer

public static final int ExifIfdPointer

A pointer to the Exif IFD. Interoperability, Exif IFD has the same structure as that of the IFD specified in TIFF. ordinarily, however, it does not contain image data as in the case of TIFF.

ExifVersion

public static final int ExifVersion

The exif version.

ExposureBiasValue

public static final int ExposureBiasValue

The exposure bias value.

ExposureIndex

public static final int ExposureIndex

Indicates the exposure index selected on the camera or input device at the time the image is captured.

ExposureMode

public static final int ExposureMode

This tag indicates the exposure mode set when the image was shot. In auto-bracketing mode, the camera shoots a series of frames of the same scene at different exposure settings.

ExposureProgram

public static final int ExposureProgram

The class of the program used by the camera to set exposure when the picture is taken.

ExposureTime

public static final int ExposureTime

Exposure time, given in seconds.

FNumber

public static final int FNumber

The F number.

FileSource

public static final int FileSource

The file source.

Flash

public static final int Flash

Indicates the status of flash when the image was shot.

FlashEnergy

public static final int FlashEnergy

Indicates the strobe energy at the time the image is captured, as measured in Beam Candle Power Seconds(BCPS).

FlashpixVersion

public static final int FlashpixVersion

The Flashpix format version supported by a FPXR file.

FocalLength

public static final int FocalLength

The actual focal length of the lens, in mm.

FocalLengthIn35MmFilm

public static final int FocalLengthIn35MmFilm

This tag indicates the equivalent focal length assuming a 35mm film camera, in mm. A value of 0 means the focal length is unknown. Note that this tag differs from the FocalLength tag.

FocalPlaneResolutionUnit

public static final int FocalPlaneResolutionUnit

Indicates the unit for measuring FocalPlaneXResolution and FocalPlaneYResolution. This value is the same as the ResolutionUnit.

FocalPlaneXResolution

public static final int FocalPlaneXResolution

Indicates the number of pixels in the image width (X) direction per FocalPlaneResolutionUnit on the camera focal plane.

FocalPlaneYResolution

public static final int FocalPlaneYResolution

Indicates the number of pixels in the image height (Y) direction per FocalPlaneResolutionUnit on the camera focal plane.

GPSAltitude

public static final int GPSAltitude

Indicates the altitude based on the reference in GPSAltitudeRef. Altitude is expressed as one RATIONAL value. The reference unit is meters.

GPSAltitudeRef

public static final int GPSAltitudeRef

Indicates the altitude used as the reference altitude. If the reference is sea level and the altitude is above sea level, 0 is given. If the altitude is below sea level, a value of 1 is given and the altitude is indicated as an absolute value in the GPSAltitude tag.

GPSAreaInformation

public static final int GPSAreaInformation

A character string recording the name of the GPS area. The first byte indicates the character code used, and this is followed by the name of the GPS area.

GPSDOP

public static final int GPSDOP

Indicates the GPS DOP (data degree of precision). An HDOP value is written during two-dimensional measurement, and PDOP during three-dimensional measurement.

GPSDateStamp

public static final int GPSDateStamp

A character string recording date and time information relative to UTC (Coordinated Universal Time). The format is YYYY:MM:DD.

GPSDestBearing

public static final int GPSDestBearing

Indicates the bearing to the destination point. The range of values is from 0.00 to 359.99.

GPSDestBearingRef

public static final int GPSDestBearingRef

Indicates the reference used for giving the bearing to the destination point. ‘T’ denotes true direction and ‘M’ is magnetic direction.

GPSDestDistance

public static final int GPSDestDistance

Indicates the distance to the destination point.

GPSDestDistanceRef

public static final int GPSDestDistanceRef

Indicates the unit used to express the distance to the destination point. ‘K’, ‘M’ and ‘N’ represent kilometers, miles and knots.

GPSDestLatitude

public static final int GPSDestLatitude

Indicates the latitude of the destination point. The latitude is expressed as three RATIONAL values giving the degrees, minutes, and seconds, respectively. If latitude is expressed as degrees, minutes and seconds, a typical format would be dd/1,mm/1,ss/1. When degrees and minutes are used and, for example, fractions of minutes are given up to two decimal places, the format would be dd/1,mmmm/100,0/1.

GPSDestLatitudeRef

public static final int GPSDestLatitudeRef

Indicates whether the latitude of the destination point is north or south latitude. The ASCII value ‘N’ indicates north latitude, and ‘S’ is south latitude.

GPSDestLongitude

public static final int GPSDestLongitude

Indicates the longitude of the destination point. The longitude is expressed as three RATIONAL values giving the degrees, minutes, and seconds, respectively. If longitude is expressed as degrees, minutes and seconds, a typical format would be ddd/1,mm/1,ss/1. When degrees and minutes are used and, for example, fractions of minutes are given up to two decimal places, the format would be ddd/1,mmmm/100,0/1.

GPSDestLongitudeRef

public static final int GPSDestLongitudeRef

Indicates whether the longitude of the destination point is east or west longitude. ASCII ‘E’ indicates east longitude, and ‘W’ is west longitude.

GPSDifferential

public static final int GPSDifferential

Indicates whether differential correction is applied to the GPS receiver.

GPSIfdPointer

public static final int GPSIfdPointer

The gps ifd pointer.

GPSImgDirection

public static final int GPSImgDirection

Indicates the direction of the image when it was captured. The range of values is from 0.00 to 359.99.

GPSImgDirectionRef

public static final int GPSImgDirectionRef

Indicates the reference for giving the direction of the image when it is captured. ‘T’ denotes true direction and ‘M’ is magnetic direction.

GPSLatitude

public static final int GPSLatitude

Indicates the latitude. The latitude is expressed as three RATIONAL values giving the degrees, minutes, and seconds, respectively. If latitude is expressed as degrees, minutes and seconds, a typical format would be dd/1,mm/1,ss/1. When degrees and minutes are used and, for example, fractions of minutes are given up to two decimal places, the format would be dd/1,mmmm/100,0/1.

GPSLatitudeRef

public static final int GPSLatitudeRef

Indicates whether the latitude is north or south latitude.

GPSLongitude

public static final int GPSLongitude

Indicates the longitude. The longitude is expressed as three RATIONAL values giving the degrees, minutes, and seconds, respectively. If longitude is expressed as degrees, minutes and seconds, a typical format would be ddd/1,mm/1,ss/1. When degrees and minutes are used and, for example, fractions of minutes are given up to two decimal places, the format would be ddd/1,mmmm/100,0/1.

GPSLongitudeRef

public static final int GPSLongitudeRef

Indicates whether the longitude is east or west longitude.

GPSMapDatum

public static final int GPSMapDatum

Indicates the geodetic survey data used by the GPS receiver.

GPSMeasureMode

public static final int GPSMeasureMode

Indicates the GPS measurement mode. - 2- or 3- dimensional.

GPSProcessingMethod

public static final int GPSProcessingMethod

A character string recording the name of the method used for location finding. The first byte indicates the character code used, and this is followed by the name of the method.

GPSSatellites

public static final int GPSSatellites

Indicates the GPS satellites used for measurements. This tag can be used to describe the number of satellites, their ID number, angle of elevation, azimuth, SNR and other information in ASCII notation. The format is not specified. If the GPS receiver is incapable of taking measurements, value of the tag shall be set to NULL.

GPSSpeed

public static final int GPSSpeed

Indicates the speed of GPS receiver movement.

GPSSpeedRef

public static final int GPSSpeedRef

Indicates the unit used to express the GPS receiver speed of movement. ‘K’ ‘M’ and ‘N’ represents kilometers per hour, miles per hour, and knots.

GPSStatus

public static final int GPSStatus

Indicates the status of the GPS receiver when the image is recorded.

GPSTimestamp

public static final int GPSTimestamp

Indicates the time as UTC (Coordinated Universal Time). TimeStamp is expressed as three RATIONAL values giving the hour, minute, and second.

GPSTrack

public static final int GPSTrack

Indicates the direction of GPS receiver movement. The range of values is from 0.00 to 359.99.

GPSTrackRef

public static final int GPSTrackRef

Indicates the reference for giving the direction of GPS receiver movement. ‘T’ denotes true direction and ‘M’ is magnetic direction.

GPSVersionID

public static final int GPSVersionID

Indicates the version of GPSInfoIFD.

GainControl

public static final int GainControl

This tag indicates the degree of overall image gain adjustment.

Gamma

public static final int Gamma

Gamma value

ISOSpeed

public static final int ISOSpeed

Information about iso speed value as defined in ISO 12232

ISOSpeedLatitudeYYY

public static final int ISOSpeedLatitudeYYY

This tag indicates ISO speed latitude yyy value as defined in ISO 12232

ISOSpeedLatitudeZZZ

public static final int ISOSpeedLatitudeZZZ

This tag indicates ISO speed latitude zzz value as defined in ISO 12232

ImageDescription

public static final int ImageDescription

A character string giving the title of the image. It may be a comment such as “1988 company picnic” or the like.

ImageLength

public static final int ImageLength

The number of rows of image data.

ImageUniqueID

public static final int ImageUniqueID

The image unique id.

ImageWidth

public static final int ImageWidth

The number of columns of image data, equal to the number of pixels per row.

JPEGInterchangeFormat

public static final int JPEGInterchangeFormat

The offset to the start byte (SOI) of JPEG compressed thumbnail data. This is not used for primary image JPEG data.

JPEGInterchangeFormatLength

public static final int JPEGInterchangeFormatLength

The number of bytes of JPEG compressed thumbnail data. This is not used for primary image JPEG data. JPEG thumbnails are not divided but are recorded as a continuous JPEG bitstream from SOI to EOI. Appn and COM markers should not be recorded. Compressed thumbnails must be recorded in no more than 64 Kbytes, including all other data to be recorded in APP1.

LensMake

public static final int LensMake

This tag records lens manufacturer

LensModel

public static final int LensModel

This tag records lenss model name and model number

LensSerialNumber

public static final int LensSerialNumber

This tag records the serial number of interchangable lens

LensSpecification

public static final int LensSpecification

This tag notes minimum focal length, maximum focal length, minimum F number in the minimum focal length and minimum F number in maximum focal length

LightSource

public static final int LightSource

The kind light source.

Make

public static final int Make

The manufacturer of the recording equipment. This is the manufacturer of the DSC, scanner, video digitizer or other equipment that generated the image. When the field is left blank, it is treated as unknown.

MakerNote

public static final int MakerNote

A tag for manufacturers of Exif writers to record any desired information. The contents are up to the manufacturer, but this tag should not be used for any other than its intended purpose.

MaxApertureValue

public static final int MaxApertureValue

The max aperture value.

MeteringMode

public static final int MeteringMode

The metering mode.

Model

public static final int Model

The model name or model number of the equipment. This is the model name or number of the DSC, scanner, video digitizer or other equipment that generated the image. When the field is left blank, it is treated as unknown.

OECF

public static final int OECF

Indicates the Opto-Electric Conversion Function (OECF) specified in ISO 14524.

Orientation

public static final int Orientation

The image orientation viewed in terms of rows and columns.

PhotographicSensitivity

public static final int PhotographicSensitivity

Indicates the ISO Speed and ISO Latitude of the camera or input device as specified in ISO 12232.

PhotometricInterpretation

public static final int PhotometricInterpretation

The pixel composition.

PixelXDimension

public static final int PixelXDimension

Information specific to compressed data. When a compressed file is recorded, the valid width of the meaningful image shall be recorded in this tag, whether or not there is padding data or a restart marker.

PixelYDimension

public static final int PixelYDimension

Information specific to compressed data. When a compressed file is recorded, the valid height of the meaningful image shall be recorded in this tag

PlanarConfiguration

public static final int PlanarConfiguration

Indicates whether pixel components are recorded in a chunky or planar format. If this field does not exist, the TIFF default of 1 (chunky) is assumed.

PrimaryChromaticities

public static final int PrimaryChromaticities

The chromaticity of the three primary colors of the image. Normally this tag is not necessary, since colorspace is specified in the colorspace information ColorSpace tag.

RecommendedExposureIndex

public static final int RecommendedExposureIndex

Indicates recommended exposure index

ReferenceBlackWhite

public static final int ReferenceBlackWhite

The reference black point value and reference white point value. No defaults are given in TIFF, but the values below are given as defaults here. The color space is declared in a color space information tag, with the default being the value that gives the optimal image characteristics Interoperability these conditions

RelatedSoundFile

public static final int RelatedSoundFile

The related sound file.

ResolutionUnit

public static final int ResolutionUnit

The unit for measuring XResolution and YResolution. The same unit is used for both XResolution and YResolution. If the image resolution is unknown, 2 (inches) is designated.

RowsPerStrip

public static final int RowsPerStrip

The number of rows per strip. This is the number of rows in the image of one strip when an image is divided into strips.

SamplesPerPixel

public static final int SamplesPerPixel

The number of components per pixel. Since this standard applies to RGB and YCbCr images, the value set for this tag is 3.

Saturation

public static final int Saturation

This tag indicates the direction of saturation processing applied by the camera when the image was shot.

SceneCaptureType

public static final int SceneCaptureType

This tag indicates the type of scene that was shot. It can also be used to record the mode in which the image was shot.

SceneType

public static final int SceneType

Indicates the type of scene. If a DSC recorded the image, this tag value shall always be set to 1, indicating that the image was directly photographed.

SensingMethod

public static final int SensingMethod

Indicates the image sensor type on the camera or input device.

SensitivityType

public static final int SensitivityType

Type of photographic sensitivity

Sharpness

public static final int Sharpness

This tag indicates the direction of sharpness processing applied by the camera when the image was shot

ShutterSpeedValue

public static final int ShutterSpeedValue

The shutter speed value.

Software

public static final int Software

This tag records the name and version of the software or firmware of the camera or image input device used to generate the image. The detailed format is not specified, but it is recommended that the example shown below be followed. When the field is left blank, it is treated as unknown.

SpatialFrequencyResponse

public static final int SpatialFrequencyResponse

This tag records the camera or input device spatial frequency table and SFR values in the direction of image width, image height, and diagonal direction, as specified in ISO 12233.

SpectralSensitivity

public static final int SpectralSensitivity

Indicates the spectral sensitivity of each channel of the camera used.

StandardOutputSensitivity

public static final int StandardOutputSensitivity

Indicates standard output sensitivity of camera

StripByteCounts

public static final int StripByteCounts

The total number of bytes in each strip.

StripOffsets

public static final int StripOffsets

For each strip, the byte offset of that strip. It is recommended that this be selected so the number of strip bytes does not exceed 64 Kbytes. Aux tag.

SubjectArea

public static final int SubjectArea

This tag indicates the location and area of the main subject in the overall scene.

SubjectDistance

public static final int SubjectDistance

The distance to the subject, given in meters.

SubjectDistanceRange

public static final int SubjectDistanceRange

This tag indicates the distance to the subject.

SubjectLocation

public static final int SubjectLocation

Indicates the location of the main subject in the scene. The value of this tag represents the pixel at the center of the main subject relative to the left edge, prior to rotation processing as per the Rotation tag.

SubsecTime

public static final int SubsecTime

A tag used to record fractions of seconds for the DateTime tag.

SubsecTimeDigitized

public static final int SubsecTimeDigitized

A tag used to record fractions of seconds for the DateTimeDigitized tag.

SubsecTimeOriginal

public static final int SubsecTimeOriginal

A tag used to record fractions of seconds for the DateTimeOriginal tag.

TransferFunction

public static final int TransferFunction

A transfer function for the image, described in tabular style. Normally this tag is not necessary, since color space is specified in the color space information ColorSpace tag.

UserComment

public static final int UserComment

A tag for Exif users to write keywords or comments on the image besides those in ImageDescription, and without the character code limitations of the ImageDescription tag.

WhiteBalance

public static final int WhiteBalance

This tag indicates the white balance mode set when the image was shot.

WhitePoint

public static final int WhitePoint

The chromaticity of the white point of the image. Normally this tag is not necessary, since color space is specified in the colorspace information ColorSpace tag.

XResolution

public static final int XResolution

The number of pixels per ResolutionUnit in the ImageWidth direction. When the image resolution is unknown, 72 [dpi] is designated.

YCbCrCoefficients

public static final int YCbCrCoefficients

The matrix coefficients for transformation from RGB to YCbCr image data.

YCbCrPositioning

public static final int YCbCrPositioning

The position of chrominance components in relation to the luminance component. This field is designated only for JPEG compressed data or uncompressed YCbCr data. The TIFF default is 1 (centered); but when Y:Cb:Cr = 4:2:2 it is recommended in this standard that 2 (co-sited) be used to record data, in order to improve the image quality when viewed on TV systems. When this field does not exist, the reader shall assume the TIFF default. In the case of Y:Cb:Cr = 4:2:0, the TIFF default (centered) is recommended. If the reader does not have the capability of supporting both kinds of YCbCrPositioning, it shall follow the TIFF default regardless of the value in this field. It is preferable that readers " be able to support both centered and co-sited positioning.

YCbCrSubSampling

public static final int YCbCrSubSampling

The sampling ratio of chrominance components in relation to the luminance component.

YResolution

public static final int YResolution

The number of pixels per ResolutionUnit in the ImageLength direction. The same value as XResolution is designated.

Clone()

public System.Enum Clone()

Returns: com.aspose.ms.System.Enum

CloneTo(T arg0)

public abstract void CloneTo(T arg0)

Parameters:

ParameterTypeDescription
arg0T

CloneTo(System.Enum arg0)

public void CloneTo(System.Enum arg0)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Enum

equals(Object arg0)

public boolean equals(Object arg0)

Parameters:

ParameterTypeDescription
arg0java.lang.Object

Returns: boolean

format(System.Type arg0, Object arg1, String arg2)

public static String format(System.Type arg0, Object arg1, String arg2)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Type
arg1java.lang.Object
arg2java.lang.String

Returns: java.lang.String

format(Class arg0, long arg1, String arg2)

public static String format(Class<?> arg0, long arg1, String arg2)

Parameters:

ParameterTypeDescription
arg0java.lang.Class
arg1long
arg2java.lang.String

Returns: java.lang.String

getClass()

public final native Class<?> getClass()

Returns: java.lang.Class

getName(System.Type arg0, Object arg1)

public static String getName(System.Type arg0, Object arg1)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Type
arg1java.lang.Object

Returns: java.lang.String

getName(Class arg0, long arg1)

public static String getName(Class<?> arg0, long arg1)

Parameters:

ParameterTypeDescription
arg0java.lang.Class
arg1long

Returns: java.lang.String

getNames()

public String[] getNames()

Returns: java.lang.String[]

getNames(System.Type arg0)

public static String[] getNames(System.Type arg0)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Type

Returns: java.lang.String[]

getNames(Class arg0)

public static Collection<String> getNames(Class<?> arg0)

Parameters:

ParameterTypeDescription
arg0java.lang.Class

Returns: java.util.Collection<java.lang.String>

getUnderlyingType(System.Type arg0)

public static System.Type getUnderlyingType(System.Type arg0)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Type

Returns: com.aspose.ms.System.Type

getUnderlyingType(Class arg0)

public static Class<? extends Number> getUnderlyingType(Class<?> arg0)

Parameters:

ParameterTypeDescription
arg0java.lang.Class

Returns: java.lang.Class<? extends java.lang.Number>

getValue(Class arg0, String arg1)

public static long getValue(Class<?> arg0, String arg1)

Parameters:

ParameterTypeDescription
arg0java.lang.Class
arg1java.lang.String

Returns: long

getValues()

public Long[] getValues()

Returns: java.lang.Long[]

getValues(System.Type arg0)

public static System.Array getValues(System.Type arg0)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Type

Returns: com.aspose.ms.System.Array

getValues(Class arg0)

public static Long[] getValues(Class<?> arg0)

Parameters:

ParameterTypeDescription
arg0java.lang.Class

Returns: java.lang.Long[]

get_Caption()

public String get_Caption()

Returns: java.lang.String

get_Value()

public long get_Value()

Returns: long

hashCode()

public native int hashCode()

Returns: int

isDefined(System.Type arg0, Object arg1)

public static boolean isDefined(System.Type arg0, Object arg1)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Type
arg1java.lang.Object

Returns: boolean

isDefined(System.Type arg0, String arg1)

public static boolean isDefined(System.Type arg0, String arg1)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Type
arg1java.lang.String

Returns: boolean

isDefined(System.Type arg0, long arg1)

public static boolean isDefined(System.Type arg0, long arg1)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Type
arg1long

Returns: boolean

isDefined(Class arg0, long arg1)

public static boolean isDefined(Class<?> arg0, long arg1)

Parameters:

ParameterTypeDescription
arg0java.lang.Class
arg1long

Returns: boolean

notify()

public final native void notify()

notifyAll()

public final native void notifyAll()

parse(System.Type arg0, String arg1)

public static long parse(System.Type arg0, String arg1)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Type
arg1java.lang.String

Returns: long

parse(System.Type arg0, String arg1, Boolean arg2)

public static long parse(System.Type arg0, String arg1, Boolean arg2)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Type
arg1java.lang.String
arg2java.lang.Boolean

Returns: long

parse(Class arg0, String arg1)

public static long parse(Class<?> arg0, String arg1)

Parameters:

ParameterTypeDescription
arg0java.lang.Class
arg1java.lang.String

Returns: long

parse(Class arg0, String arg1, Boolean arg2)

public static long parse(Class<?> arg0, String arg1, Boolean arg2)

Parameters:

ParameterTypeDescription
arg0java.lang.Class
arg1java.lang.String
arg2java.lang.Boolean

Returns: long

register(System.Enum.AbstractEnum arg0)

public static void register(System.Enum.AbstractEnum arg0)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Enum.AbstractEnum

toObject(System.Type arg0, Object arg1)

public static Object toObject(System.Type arg0, Object arg1)

Parameters:

ParameterTypeDescription
arg0com.aspose.ms.System.Type
arg1java.lang.Object

Returns: java.lang.Object

toString()

public String toString()

Returns: java.lang.String

toString(Class arg0, long arg1)

public static String toString(Class<?> arg0, long arg1)

Parameters:

ParameterTypeDescription
arg0java.lang.Class
arg1long

Returns: java.lang.String

wait()

public final void wait()

wait(long arg0)

public final void wait(long arg0)

Parameters:

ParameterTypeDescription
arg0long

wait(long arg0, int arg1)

public final void wait(long arg0, int arg1)

Parameters:

ParameterTypeDescription
arg0long
arg1int