Aspose::Slides::Charts::IAxis Class Referenceabstract

Encapsulates the object that represents a chart's axis. More...

Inherits Aspose::Slides::Charts::IFormattedTextContainer.

Inherited by Aspose::Slides::Charts::Axis.

Public Member Functions

virtual bool get_AxisBetweenCategories ()=0
 Represents if the value axis crosses the category axis between categories. This property applies only to category axes, and it doesn't apply to 3-D charts. Read bool. More...
 
virtual void set_AxisBetweenCategories (bool value)=0
 Represents if the value axis crosses the category axis between categories. This property applies only to category axes, and it doesn't apply to 3-D charts. Write bool. More...
 
virtual float get_CrossAt ()=0
 Represents the point on the axis where the perpendicular axis crosses it. Read float. More...
 
virtual void set_CrossAt (float value)=0
 Represents the point on the axis where the perpendicular axis crosses it. Write float. More...
 
virtual DisplayUnitType get_DisplayUnit ()=0
 Specifies the scaling value of the display units for the value axis. Read DisplayUnitType. More...
 
virtual void set_DisplayUnit (DisplayUnitType value)=0
 Specifies the scaling value of the display units for the value axis. Write DisplayUnitType. More...
 
virtual double get_ActualMaxValue ()=0
 Specifies actual maximum value on the axis. Call method IChart.ValidateChartLayout() previously to get actual value. More...
 
virtual double get_ActualMinValue ()=0
 Specifies actual minimum value on the axis. Call method IChart.ValidateChartLayout() previously to get actual value. More...
 
virtual double get_ActualMajorUnit ()=0
 Specifies actual major unit of the axis. Call method IChart.ValidateChartLayout() previously to get actual value. More...
 
virtual double get_ActualMinorUnit ()=0
 Specifies actual minor unit of the axis. Call method IChart.ValidateChartLayout() previously to get actual value. More...
 
virtual TimeUnitType get_ActualMajorUnitScale ()=0
 Specifies actual major unit scale of the axis. Call method IChart.ValidateChartLayout() previously to get actual value. More...
 
virtual TimeUnitType get_ActualMinorUnitScale ()=0
 Specifies actual minor unit scale of the axis. Call method IChart.ValidateChartLayout() previously to get actual value. More...
 
virtual bool get_IsAutomaticMaxValue ()=0
 Indicates whether the max value is automatically assigned. Read bool. More...
 
virtual void set_IsAutomaticMaxValue (bool value)=0
 Indicates whether the max value is automatically assigned. Write bool. More...
 
virtual double get_MaxValue ()=0
 Represents the maximum value on the value axis. Read double. More...
 
virtual void set_MaxValue (double value)=0
 Represents the maximum value on the value axis. Write double. More...
 
virtual double get_MinorUnit ()=0
 Represents the minor units for the date or value axis. Read double. More...
 
virtual void set_MinorUnit (double value)=0
 Represents the minor units for the date or value axis. Write double. More...
 
virtual bool get_IsAutomaticMinorUnit ()=0
 Indicates whether the minor unit of the axis is automatically assigned. Read bool. More...
 
virtual void set_IsAutomaticMinorUnit (bool value)=0
 Indicates whether the minor unit of the axis is automatically assigned. Write bool. More...
 
virtual double get_MajorUnit ()=0
 Represents the major units for the date or value axis. Read double. More...
 
virtual void set_MajorUnit (double value)=0
 Represents the major units for the date or value axis. Write double. More...
 
virtual bool get_IsAutomaticMajorUnit ()=0
 Indicates whether the major unit of the axis is automatically assigned. Read bool. More...
 
virtual void set_IsAutomaticMajorUnit (bool value)=0
 Indicates whether the major unit of the axis is automatically assigned. Write bool. More...
 
virtual bool get_IsAutomaticMinValue ()=0
 Indicates whether the min value is automatically assigned. Read bool. More...
 
virtual void set_IsAutomaticMinValue (bool value)=0
 Indicates whether the min value is automatically assigned. Write bool. More...
 
virtual double get_MinValue ()=0
 Represents the minimum value on the value axis. Read double. More...
 
virtual void set_MinValue (double value)=0
 Represents the minimum value on the value axis. Write double. More...
 
virtual bool get_IsLogarithmic ()=0
 Represents if the value axis scale type is logarithmic or not. Read bool. More...
 
virtual void set_IsLogarithmic (bool value)=0
 Represents if the value axis scale type is logarithmic or not. Write bool. More...
 
virtual double get_LogBase ()=0
 Represents the logarithmic base. Default value is 10. Read double. More...
 
virtual void set_LogBase (double value)=0
 Represents the logarithmic base. Default value is 10. Write double. More...
 
virtual bool get_IsPlotOrderReversed ()=0
 Represents if MS PowerPoint plots data points from last to first. Read bool. More...
 
virtual void set_IsPlotOrderReversed (bool value)=0
 Represents if MS PowerPoint plots data points from last to first. Write bool. More...
 
virtual bool get_IsVisible ()=0
 Represents if the axis is visible. Read bool. More...
 
virtual void set_IsVisible (bool value)=0
 Represents if the axis is visible. Write bool. More...
 
virtual TickMarkType get_MajorTickMark ()=0
 Represents the type of major tick mark for the specified axis. Read TickMarkType. More...
 
virtual void set_MajorTickMark (TickMarkType value)=0
 Represents the type of major tick mark for the specified axis. Write TickMarkType. More...
 
virtual TickMarkType get_MinorTickMark ()=0
 Represents the type of minor tick mark for the specified axis. Read TickMarkType. More...
 
virtual void set_MinorTickMark (TickMarkType value)=0
 Represents the type of minor tick mark for the specified axis. Write TickMarkType. More...
 
virtual TickLabelPositionType get_TickLabelPosition ()=0
 Represents the position of tick-mark labels on the specified axis. Read TickLabelPositionType. More...
 
virtual void set_TickLabelPosition (TickLabelPositionType value)=0
 Represents the position of tick-mark labels on the specified axis. Write TickLabelPositionType. More...
 
virtual TimeUnitType get_MajorUnitScale ()=0
 Represents the major unit scale for the date axis. Read TimeUnitType. More...
 
virtual void set_MajorUnitScale (TimeUnitType value)=0
 Represents the major unit scale for the date axis. Write TimeUnitType. More...
 
virtual TimeUnitType get_MinorUnitScale ()=0
 Represents the major unit scale for the date axis. Read TimeUnitType. More...
 
virtual void set_MinorUnitScale (TimeUnitType value)=0
 Represents the major unit scale for the date axis. Write TimeUnitType. More...
 
virtual TimeUnitType get_BaseUnitScale ()=0
 Specifies the smallest time unit that is represented on the date axis. Read TimeUnitType. More...
 
virtual void set_BaseUnitScale (TimeUnitType value)=0
 Specifies the smallest time unit that is represented on the date axis. Write TimeUnitType. More...
 
virtual System::SharedPtr< IChartLinesFormatget_MinorGridLinesFormat ()=0
 Represents minor gridlines format on a chart axis. Read-only IChartLinesFormat. More...
 
virtual System::SharedPtr< IChartLinesFormatget_MajorGridLinesFormat ()=0
 Represents major gridlines format on a chart axis. Read-only IChartLinesFormat. More...
 
virtual bool get_ShowMinorGridLines ()=0
 Represents if the minor gridlines showed. Read-only bool. More...
 
virtual bool get_ShowMajorGridLines ()=0
 Represents if the major gridlines showed. Read-only bool. More...
 
virtual System::SharedPtr< IAxisFormatget_Format ()=0
 Represents format of axis. Read-only IAxisFormat. More...
 
virtual System::SharedPtr< IChartTitleget_Title ()=0
 Gets the axis' title. Read-only IChartTitle. More...
 
virtual CrossesType get_CrossType ()=0
 Represents the CrossType on the specified axis where the other axis crosses. Read CrossesType. More...
 
virtual void set_CrossType (CrossesType value)=0
 Represents the CrossType on the specified axis where the other axis crosses. Write CrossesType. More...
 
virtual AxisPositionType get_Position ()=0
 Represents position of axis. Read AxisPositionType. More...
 
virtual void set_Position (AxisPositionType value)=0
 Represents position of axis. Write AxisPositionType. More...
 
virtual bool get_HasTitle ()=0
 Determines whether a axis has a visible title. Read bool. More...
 
virtual void set_HasTitle (bool value)=0
 Determines whether a axis has a visible title. Write bool. More...
 
virtual System::String get_NumberFormat ()=0
 Represents the format string for the Axis Labels. Read System::String. More...
 
virtual void set_NumberFormat (System::String value)=0
 Represents the format string for the Axis Labels. Write System::String. More...
 
virtual bool get_IsNumberFormatLinkedToSource ()=0
 Indicates whether the format is linked source data. Read bool. More...
 
virtual void set_IsNumberFormatLinkedToSource (bool value)=0
 Indicates whether the format is linked source data. Write bool. More...
 
virtual float get_TickLabelRotationAngle ()=0
 Represents the rotation angle of tick labels Read float. More...
 
virtual void set_TickLabelRotationAngle (float value)=0
 Represents the rotation angle of tick labels Write float. More...
 
virtual uint32_t get_TickLabelSpacing ()=0
 Specifies how many tick labels to skip between label that is drawn. Read uint32_t. More...
 
virtual void set_TickLabelSpacing (uint32_t value)=0
 Specifies how many tick labels to skip between label that is drawn. Write uint32_t. More...
 
virtual bool get_IsAutomaticTickLabelSpacing ()=0
 Specifies automatic tick label spacing value. If false: use TickLabelSpacing property. Read bool. More...
 
virtual void set_IsAutomaticTickLabelSpacing (bool value)=0
 Specifies automatic tick label spacing value. If false: use TickLabelSpacing property. Write bool. More...
 
virtual uint32_t get_TickMarksSpacing ()=0
 Specifies how many tick marks shall be skipped before the next one shall be drawn. Applied to category or series axis. Read uint16_t. More...
 
virtual void set_TickMarksSpacing (uint32_t value)=0
 Specifies how many tick marks shall be skipped before the next one shall be drawn. Applied to category or series axis. Write uint16_t. More...
 
virtual bool get_IsAutomaticTickMarksSpacing ()=0
 Specifies automatic tick marks spacing value. If false: use TickMarksSpacing property. Read bool. More...
 
virtual void set_IsAutomaticTickMarksSpacing (bool value)=0
 Specifies automatic tick marks spacing value. If false: use TickMarksSpacing property. Write bool. More...
 
virtual uint16_t get_LabelOffset ()=0
 Specifies the distance of labels from the axis. Applied to category or date axis. Value must be between 0% and 1000%. Read uint16_t. More...
 
virtual void set_LabelOffset (uint16_t value)=0
 Specifies the distance of labels from the axis. Applied to category or date axis. Value must be between 0% and 1000%. Write uint16_t. More...
 
virtual Aspose::Slides::Charts::CategoryAxisType get_CategoryAxisType ()=0
 Specifies the type of the category axis. Read CategoryAxisType. More...
 
virtual void set_CategoryAxisType (Aspose::Slides::Charts::CategoryAxisType value)=0
 Specifies the type of the category axis. Write CategoryAxisType. More...
 
virtual AxisAggregationType get_AggregationType ()=0
 Represents aggregation type of category axis (binning). Applied to category. Used with Histogram or HistogramPareto series only. More...
 
virtual void set_AggregationType (AxisAggregationType value)=0
 Represents aggregation type of category axis (binning). Applied to category. Used with Histogram or HistogramPareto series only. More...
 
virtual double get_BinWidth ()=0
 Specifies bin width when AggregationType property value setted to AxisAggregationType.ByBinWidth. Applied to category axes. Used with Histogram or HistogramPareto series only. More...
 
virtual void set_BinWidth (double value)=0
 Specifies bin width when AggregationType property value setted to AxisAggregationType.ByBinWidth. Applied to category axes. Used with Histogram or HistogramPareto series only. More...
 
virtual uint32_t get_NumberOfBins ()=0
 Specifies number of bins when AggregationType property value setted to AxisAggregationType.ByNumberOfBins. Applied to category axes. Used with Histogram or HistogramPareto series only. More...
 
virtual void set_NumberOfBins (uint32_t value)=0
 Specifies number of bins when AggregationType property value setted to AxisAggregationType.ByNumberOfBins. Applied to category axes. Used with Histogram or HistogramPareto series only. More...
 
virtual bool get_IsOverflowBin ()=0
 Specifies if overflow bin applied. Use IsAutomaticOverflowBin and OverflowBin to adjust overflow bin value. More...
 
virtual void set_IsOverflowBin (bool value)=0
 Specifies if overflow bin applied. Use IsAutomaticOverflowBin and OverflowBin to adjust overflow bin value. More...
 
virtual bool get_IsAutomaticOverflowBin ()=0
 Specifies automatic overflow bin value. If false: use OverflowBin property. More...
 
virtual void set_IsAutomaticOverflowBin (bool value)=0
 Specifies automatic overflow bin value. If false: use OverflowBin property. More...
 
virtual double get_OverflowBin ()=0
 Specifies overflow bin custom value. Applied when IsAutomaticOverflowBin property setted to false and IsOverflowBin property equals true. More...
 
virtual void set_OverflowBin (double value)=0
 Specifies overflow bin custom value. Applied when IsAutomaticOverflowBin property setted to false and IsOverflowBin property equals true. More...
 
virtual bool get_IsUnderflowBin ()=0
 Specifies if underflow bin applied. Use IsAutomaticUnderflowBin and UnderflowBin to adjust underflow bin value. More...
 
virtual void set_IsUnderflowBin (bool value)=0
 Specifies if underflow bin applied. Use IsAutomaticUnderflowBin and UnderflowBin to adjust underflow bin value. More...
 
virtual bool get_IsAutomaticUnderflowBin ()=0
 Specifies automatic underflow bin value. If false: use UnderflowBin property. More...
 
virtual void set_IsAutomaticUnderflowBin (bool value)=0
 Specifies automatic underflow bin value. If false: use UnderflowBin property. More...
 
virtual double get_UnderflowBin ()=0
 Specifies underflow bin custom value. Applied when IsAutomaticUnderflowBin property setted to false and IsUnderflowBin property equals true. More...
 
virtual void set_UnderflowBin (double value)=0
 Specifies underflow bin custom value. Applied when IsAutomaticUnderflowBin property setted to false and IsUnderflowBin property equals true. More...
 
virtual void SetCategoryAxisTypeAutomatically ()=0
 Sets IAxis.CategoryAxisType property with a value that is automatically determined based on axis data. More...
 
- Public Member Functions inherited from Aspose::Slides::Charts::IFormattedTextContainer
virtual System::SharedPtr< IChartTextFormatget_TextFormat ()=0
 Returns chart text format. Read-only IChartTextFormat. More...
 
- Public Member Functions inherited from Aspose::Slides::Charts::IChartComponent
virtual System::SharedPtr< IChartget_Chart ()=0
 Returns the chart. Read-only IChart. More...
 
- Public Member Functions inherited from Aspose::Slides::ISlideComponent
virtual System::SharedPtr< IBaseSlideget_Slide ()=0
 Returns the base slide. Read-only IBaseSlide. More...
 
- Public Member Functions inherited from Aspose::Slides::IPresentationComponent
virtual System::SharedPtr< IPresentationget_Presentation ()=0
 Returns the presentation. Read-only IPresentation. More...
 
- Public Member Functions inherited from System::Object
 Object ()
 Creates object. Initializes all internal data structures. More...
 
virtual ~Object ()
 Destroys object. Frees all internal data structures. More...
 
 Object (Object const &x)
 Copy constructor. Doesn't copy anything, really, just initializes new object and enables copy constructing subclasses. More...
 
Objectoperator= (Object const &x)
 Assignment operator. Doesn't copy anything, really, just initializes new object and enables copy constructing subclasses. More...
 
ObjectSharedRefAdded ()
 Increments shared reference count. Shouldn't be called directly; instead, use smart pointers or ThisProtector. More...
 
int SharedRefRemovedSafe ()
 Decrements and returns shared reference count. Shouldn't be called directly; instead, use smart pointers or ThisProtector. More...
 
void SharedRefRemoved ()
 Decrements shared reference count and deletes object if it hits zero. Shouldn't be called directly; instead, use smart pointers or ThisProtector. More...
 
Detail::SmartPtrCounter * WeakRefAdded ()
 Increments weak reference count. Shouldn't be called directly; instead, use smart pointers or ThisProtector. More...
 
void WeakRefRemoved ()
 Decrements weak reference count. Shouldn't be called directly; instead, use smart pointers or ThisProtector. More...
 
Detail::SmartPtrCounter * GetCounter ()
 Gets reference counter data structure associated with the object. More...
 
int SharedCount () const
 Gets current value of shared refernce counter. More...
 
void FreeOrDetectCycles (int count)
 Reacts on shared reference counter decrement. Shouldn't be called directly, use smart pointers instead. If neccessary, deletes the object. If allowed, initiates loop references lookup. More...
 
void Lock ()
 Implements C# lock() statement locking. Call directly or use LockContext sentry object. More...
 
void Unlock ()
 Implements C# lock() statement unlocking. Call directly or use LockContext sentry object. More...
 
virtual bool Equals (ptr obj)
 Compares objects using C# Object.Equals semantics. More...
 
virtual int GetHashCode () const
 Analog of C# Object.GetHashCode() method. Enables hashing of custom objects. More...
 
virtual String ToString () ASPOSE_CONST
 Analog of C# Object.ToString() method. Enables converting custom objects to string. More...
 
virtual ptr MemberwiseClone () const
 Analog of C# Object.MemberwiseClone() method. Enables cloning custom types. More...
 
virtual const TypeInfoGetType () const
 Gets actual type of object. Analog of C# System.Object.GetType() call. More...
 
virtual bool Is (const TypeInfo &targetType) const
 Check if object represents an instance of type described by targetType. Analog of C# 'is' operator. More...
 
void __FreePointers ()
 Resets all smart pointers stored inside this object directly (in fields) or indirectly (in value type fields). Used by memory management systems, shouldn't be called directly. More...
 
virtual void SetTemplateWeakPtr (unsigned int argument)
 Set n'th template argument a weak pointer (rather than shared). Allows switching pointers in containers to weak mode. More...
 
template<>
bool Equals (float const &objA, float const &objB)
 
template<>
bool Equals (double const &objA, double const &objB)
 
template<>
bool ReferenceEquals (String const &str, std::nullptr_t)
 
template<>
bool ReferenceEquals (String const &str1, String const &str2)
 

Additional Inherited Members

- Public Types inherited from System::Object
typedef SmartPtr< Objectptr
 Alias for smart pointer type. More...
 
- Static Public Member Functions inherited from System::Object
static bool ReferenceEquals (ptr const &objA, ptr const &objB)
 Compares objects by reference. More...
 
template<typename T >
static std::enable_if<!IsSmartPtr< T >::value, bool >::type ReferenceEquals (T const &objA, T const &objB)
 Compares objects by reference. More...
 
template<typename T >
static std::enable_if<!IsSmartPtr< T >::value, bool >::type ReferenceEquals (T const &objA, std::nullptr_t)
 Reference-compares value type object with nullptr. More...
 
template<typename T1 , typename T2 >
static std::enable_if< IsSmartPtr< T1 >::value &&IsSmartPtr< T2 >::value, bool >::type Equals (T1 const &objA, T2 const &objB)
 Compares reference type objects in C# style. More...
 
template<typename T1 , typename T2 >
static std::enable_if<!IsSmartPtr< T1 >::value &&!IsSmartPtr< T2 >::value, bool >::type Equals (T1 const &objA, T2 const &objB)
 Compares value type objects in C# style. More...
 
static const TypeInfoType ()
 Impleemnts C# typeof(System.Object) construct. More...
 
- Protected Types inherited from System::Object
template<class T >
using supports_free_pointers = decltype(__SupportsFreePointers(std::declval< T * >()))
 Checks if T type supports __FreePointers() method. More...
 
- Protected Member Functions inherited from System::Object
template<class Container , typename Value = typename Container::value_type>
std::enable_if<!System::IsSmartPtr< Value >::value &&!System::detail::is_a< Value, std::pair >::value, void >::type PopulateSharedMembers (Object::shared_members_type &, const char *, Container &)
 
template<class Container , typename Value = typename Container::value_type>
std::enable_if< System::IsSmartPtr< Value >::value, void >::type PopulateSharedMembers (Object::shared_members_type &data, const char *name, Container &container)
 
template<class Container , typename Value = typename Container::value_type>
std::enable_if< System::detail::is_a< Value, std::pair >::value &&!System::IsSmartPtr< typename Value::first_type >::value &&!System::IsSmartPtr< typename Value::second_type >::value, void >::type PopulateSharedMembers (Object::shared_members_type &, const char *, Container &)
 
template<class Container , typename Value = typename Container::value_type>
std::enable_if< System::detail::is_a< Value, std::pair >::value &&System::IsSmartPtr< typename Value::first_type >::value &&!System::IsSmartPtr< typename Value::second_type >::value, void >::type PopulateSharedMembers (Object::shared_members_type &data, const char *name, Container &container)
 
template<class Container , typename Value = typename Container::value_type>
std::enable_if< System::detail::is_a< Value, std::pair >::value &&!System::IsSmartPtr< typename Value::first_type >::value &&System::IsSmartPtr< typename Value::second_type >::value, void >::type PopulateSharedMembers (Object::shared_members_type &data, const char *name, Container &container)
 
template<class Container , typename Value = typename Container::value_type>
std::enable_if< System::detail::is_a< Value, std::pair >::value &&System::IsSmartPtr< typename Value::first_type >::value &&System::IsSmartPtr< typename Value::second_type >::value, void >::type PopulateSharedMembers (Object::shared_members_type &data, const char *name, Container &container)
 
- Static Protected Member Functions inherited from System::Object
template<class T , class Check = decltype(std::declval<T*>()->__FreePointers())>
static std::true_type __SupportsFreePointers (T *)
 Formal function for template magic to check if type T supports __FreePointers() method. More...
 
static std::false_type __SupportsFreePointers (...)
 Formal function for template magic to check if type T supports __FreePointers() method. More...
 
template<class T >
static std::enable_if< supports_free_pointers< T >::value, void >::type __DoFreePointers (T &t)
 
template<class T >
static std::enable_if<!supports_free_pointers< T >::value &&!std::is_fundamental< T >::value &&!std::is_enum< T >::value &&!std::is_const< T >::value, void >::type __DoFreePointers (const T &)
 
template<class T >
static std::enable_if<!supports_free_pointers< T >::value &&!std::is_fundamental< T >::value &&!std::is_enum< T >::value &&std::is_const< T >::value, void >::type __DoFreePointers (T &)
 
template<class T >
static std::enable_if< std::is_fundamental< T >::value||std::is_enum< T >::value, void >::type __DoFreePointers (T)
 

Detailed Description

Encapsulates the object that represents a chart's axis.

Member Function Documentation

◆ get_ActualMajorUnit()

virtual double Aspose::Slides::Charts::IAxis::get_ActualMajorUnit ( )
pure virtual

Specifies actual major unit of the axis. Call method IChart.ValidateChartLayout() previously to get actual value.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_ActualMajorUnitScale()

virtual TimeUnitType Aspose::Slides::Charts::IAxis::get_ActualMajorUnitScale ( )
pure virtual

Specifies actual major unit scale of the axis. Call method IChart.ValidateChartLayout() previously to get actual value.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_ActualMaxValue()

virtual double Aspose::Slides::Charts::IAxis::get_ActualMaxValue ( )
pure virtual

Specifies actual maximum value on the axis. Call method IChart.ValidateChartLayout() previously to get actual value.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_ActualMinorUnit()

virtual double Aspose::Slides::Charts::IAxis::get_ActualMinorUnit ( )
pure virtual

Specifies actual minor unit of the axis. Call method IChart.ValidateChartLayout() previously to get actual value.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_ActualMinorUnitScale()

virtual TimeUnitType Aspose::Slides::Charts::IAxis::get_ActualMinorUnitScale ( )
pure virtual

Specifies actual minor unit scale of the axis. Call method IChart.ValidateChartLayout() previously to get actual value.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_ActualMinValue()

virtual double Aspose::Slides::Charts::IAxis::get_ActualMinValue ( )
pure virtual

Specifies actual minimum value on the axis. Call method IChart.ValidateChartLayout() previously to get actual value.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_AggregationType()

virtual AxisAggregationType Aspose::Slides::Charts::IAxis::get_AggregationType ( )
pure virtual

Represents aggregation type of category axis (binning). Applied to category. Used with Histogram or HistogramPareto series only.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_AxisBetweenCategories()

virtual bool Aspose::Slides::Charts::IAxis::get_AxisBetweenCategories ( )
pure virtual

Represents if the value axis crosses the category axis between categories. This property applies only to category axes, and it doesn't apply to 3-D charts. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_BaseUnitScale()

virtual TimeUnitType Aspose::Slides::Charts::IAxis::get_BaseUnitScale ( )
pure virtual

Specifies the smallest time unit that is represented on the date axis. Read TimeUnitType.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_BinWidth()

virtual double Aspose::Slides::Charts::IAxis::get_BinWidth ( )
pure virtual

Specifies bin width when AggregationType property value setted to AxisAggregationType.ByBinWidth. Applied to category axes. Used with Histogram or HistogramPareto series only.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_CategoryAxisType()

virtual Aspose::Slides::Charts::CategoryAxisType Aspose::Slides::Charts::IAxis::get_CategoryAxisType ( )
pure virtual

Specifies the type of the category axis. Read CategoryAxisType.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_CrossAt()

virtual float Aspose::Slides::Charts::IAxis::get_CrossAt ( )
pure virtual

Represents the point on the axis where the perpendicular axis crosses it. Read float.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_CrossType()

virtual CrossesType Aspose::Slides::Charts::IAxis::get_CrossType ( )
pure virtual

Represents the CrossType on the specified axis where the other axis crosses. Read CrossesType.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_DisplayUnit()

virtual DisplayUnitType Aspose::Slides::Charts::IAxis::get_DisplayUnit ( )
pure virtual

Specifies the scaling value of the display units for the value axis. Read DisplayUnitType.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_Format()

virtual System::SharedPtr<IAxisFormat> Aspose::Slides::Charts::IAxis::get_Format ( )
pure virtual

Represents format of axis. Read-only IAxisFormat.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_HasTitle()

virtual bool Aspose::Slides::Charts::IAxis::get_HasTitle ( )
pure virtual

Determines whether a axis has a visible title. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsAutomaticMajorUnit()

virtual bool Aspose::Slides::Charts::IAxis::get_IsAutomaticMajorUnit ( )
pure virtual

Indicates whether the major unit of the axis is automatically assigned. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsAutomaticMaxValue()

virtual bool Aspose::Slides::Charts::IAxis::get_IsAutomaticMaxValue ( )
pure virtual

Indicates whether the max value is automatically assigned. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsAutomaticMinorUnit()

virtual bool Aspose::Slides::Charts::IAxis::get_IsAutomaticMinorUnit ( )
pure virtual

Indicates whether the minor unit of the axis is automatically assigned. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsAutomaticMinValue()

virtual bool Aspose::Slides::Charts::IAxis::get_IsAutomaticMinValue ( )
pure virtual

Indicates whether the min value is automatically assigned. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsAutomaticOverflowBin()

virtual bool Aspose::Slides::Charts::IAxis::get_IsAutomaticOverflowBin ( )
pure virtual

Specifies automatic overflow bin value. If false: use OverflowBin property.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsAutomaticTickLabelSpacing()

virtual bool Aspose::Slides::Charts::IAxis::get_IsAutomaticTickLabelSpacing ( )
pure virtual

Specifies automatic tick label spacing value. If false: use TickLabelSpacing property. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsAutomaticTickMarksSpacing()

virtual bool Aspose::Slides::Charts::IAxis::get_IsAutomaticTickMarksSpacing ( )
pure virtual

Specifies automatic tick marks spacing value. If false: use TickMarksSpacing property. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsAutomaticUnderflowBin()

virtual bool Aspose::Slides::Charts::IAxis::get_IsAutomaticUnderflowBin ( )
pure virtual

Specifies automatic underflow bin value. If false: use UnderflowBin property.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsLogarithmic()

virtual bool Aspose::Slides::Charts::IAxis::get_IsLogarithmic ( )
pure virtual

Represents if the value axis scale type is logarithmic or not. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsNumberFormatLinkedToSource()

virtual bool Aspose::Slides::Charts::IAxis::get_IsNumberFormatLinkedToSource ( )
pure virtual

Indicates whether the format is linked source data. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsOverflowBin()

virtual bool Aspose::Slides::Charts::IAxis::get_IsOverflowBin ( )
pure virtual

Specifies if overflow bin applied. Use IsAutomaticOverflowBin and OverflowBin to adjust overflow bin value.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsPlotOrderReversed()

virtual bool Aspose::Slides::Charts::IAxis::get_IsPlotOrderReversed ( )
pure virtual

Represents if MS PowerPoint plots data points from last to first. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsUnderflowBin()

virtual bool Aspose::Slides::Charts::IAxis::get_IsUnderflowBin ( )
pure virtual

Specifies if underflow bin applied. Use IsAutomaticUnderflowBin and UnderflowBin to adjust underflow bin value.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_IsVisible()

virtual bool Aspose::Slides::Charts::IAxis::get_IsVisible ( )
pure virtual

Represents if the axis is visible. Read bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_LabelOffset()

virtual uint16_t Aspose::Slides::Charts::IAxis::get_LabelOffset ( )
pure virtual

Specifies the distance of labels from the axis. Applied to category or date axis. Value must be between 0% and 1000%. Read uint16_t.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_LogBase()

virtual double Aspose::Slides::Charts::IAxis::get_LogBase ( )
pure virtual

Represents the logarithmic base. Default value is 10. Read double.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_MajorGridLinesFormat()

virtual System::SharedPtr<IChartLinesFormat> Aspose::Slides::Charts::IAxis::get_MajorGridLinesFormat ( )
pure virtual

Represents major gridlines format on a chart axis. Read-only IChartLinesFormat.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_MajorTickMark()

virtual TickMarkType Aspose::Slides::Charts::IAxis::get_MajorTickMark ( )
pure virtual

Represents the type of major tick mark for the specified axis. Read TickMarkType.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_MajorUnit()

virtual double Aspose::Slides::Charts::IAxis::get_MajorUnit ( )
pure virtual

Represents the major units for the date or value axis. Read double.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_MajorUnitScale()

virtual TimeUnitType Aspose::Slides::Charts::IAxis::get_MajorUnitScale ( )
pure virtual

Represents the major unit scale for the date axis. Read TimeUnitType.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_MaxValue()

virtual double Aspose::Slides::Charts::IAxis::get_MaxValue ( )
pure virtual

Represents the maximum value on the value axis. Read double.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_MinorGridLinesFormat()

virtual System::SharedPtr<IChartLinesFormat> Aspose::Slides::Charts::IAxis::get_MinorGridLinesFormat ( )
pure virtual

Represents minor gridlines format on a chart axis. Read-only IChartLinesFormat.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_MinorTickMark()

virtual TickMarkType Aspose::Slides::Charts::IAxis::get_MinorTickMark ( )
pure virtual

Represents the type of minor tick mark for the specified axis. Read TickMarkType.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_MinorUnit()

virtual double Aspose::Slides::Charts::IAxis::get_MinorUnit ( )
pure virtual

Represents the minor units for the date or value axis. Read double.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_MinorUnitScale()

virtual TimeUnitType Aspose::Slides::Charts::IAxis::get_MinorUnitScale ( )
pure virtual

Represents the major unit scale for the date axis. Read TimeUnitType.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_MinValue()

virtual double Aspose::Slides::Charts::IAxis::get_MinValue ( )
pure virtual

Represents the minimum value on the value axis. Read double.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_NumberFormat()

virtual System::String Aspose::Slides::Charts::IAxis::get_NumberFormat ( )
pure virtual

Represents the format string for the Axis Labels. Read System::String.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_NumberOfBins()

virtual uint32_t Aspose::Slides::Charts::IAxis::get_NumberOfBins ( )
pure virtual

Specifies number of bins when AggregationType property value setted to AxisAggregationType.ByNumberOfBins. Applied to category axes. Used with Histogram or HistogramPareto series only.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_OverflowBin()

virtual double Aspose::Slides::Charts::IAxis::get_OverflowBin ( )
pure virtual

Specifies overflow bin custom value. Applied when IsAutomaticOverflowBin property setted to false and IsOverflowBin property equals true.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_Position()

virtual AxisPositionType Aspose::Slides::Charts::IAxis::get_Position ( )
pure virtual

Represents position of axis. Read AxisPositionType.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_ShowMajorGridLines()

virtual bool Aspose::Slides::Charts::IAxis::get_ShowMajorGridLines ( )
pure virtual

Represents if the major gridlines showed. Read-only bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_ShowMinorGridLines()

virtual bool Aspose::Slides::Charts::IAxis::get_ShowMinorGridLines ( )
pure virtual

Represents if the minor gridlines showed. Read-only bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_TickLabelPosition()

virtual TickLabelPositionType Aspose::Slides::Charts::IAxis::get_TickLabelPosition ( )
pure virtual

Represents the position of tick-mark labels on the specified axis. Read TickLabelPositionType.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_TickLabelRotationAngle()

virtual float Aspose::Slides::Charts::IAxis::get_TickLabelRotationAngle ( )
pure virtual

Represents the rotation angle of tick labels Read float.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_TickLabelSpacing()

virtual uint32_t Aspose::Slides::Charts::IAxis::get_TickLabelSpacing ( )
pure virtual

Specifies how many tick labels to skip between label that is drawn. Read uint32_t.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_TickMarksSpacing()

virtual uint32_t Aspose::Slides::Charts::IAxis::get_TickMarksSpacing ( )
pure virtual

Specifies how many tick marks shall be skipped before the next one shall be drawn. Applied to category or series axis. Read uint16_t.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_Title()

virtual System::SharedPtr<IChartTitle> Aspose::Slides::Charts::IAxis::get_Title ( )
pure virtual

Gets the axis' title. Read-only IChartTitle.

Implemented in Aspose::Slides::Charts::Axis.

◆ get_UnderflowBin()

virtual double Aspose::Slides::Charts::IAxis::get_UnderflowBin ( )
pure virtual

Specifies underflow bin custom value. Applied when IsAutomaticUnderflowBin property setted to false and IsUnderflowBin property equals true.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_AggregationType()

virtual void Aspose::Slides::Charts::IAxis::set_AggregationType ( AxisAggregationType  value)
pure virtual

Represents aggregation type of category axis (binning). Applied to category. Used with Histogram or HistogramPareto series only.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_AxisBetweenCategories()

virtual void Aspose::Slides::Charts::IAxis::set_AxisBetweenCategories ( bool  value)
pure virtual

Represents if the value axis crosses the category axis between categories. This property applies only to category axes, and it doesn't apply to 3-D charts. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_BaseUnitScale()

virtual void Aspose::Slides::Charts::IAxis::set_BaseUnitScale ( TimeUnitType  value)
pure virtual

Specifies the smallest time unit that is represented on the date axis. Write TimeUnitType.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_BinWidth()

virtual void Aspose::Slides::Charts::IAxis::set_BinWidth ( double  value)
pure virtual

Specifies bin width when AggregationType property value setted to AxisAggregationType.ByBinWidth. Applied to category axes. Used with Histogram or HistogramPareto series only.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_CategoryAxisType()

virtual void Aspose::Slides::Charts::IAxis::set_CategoryAxisType ( Aspose::Slides::Charts::CategoryAxisType  value)
pure virtual

Specifies the type of the category axis. Write CategoryAxisType.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_CrossAt()

virtual void Aspose::Slides::Charts::IAxis::set_CrossAt ( float  value)
pure virtual

Represents the point on the axis where the perpendicular axis crosses it. Write float.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_CrossType()

virtual void Aspose::Slides::Charts::IAxis::set_CrossType ( CrossesType  value)
pure virtual

Represents the CrossType on the specified axis where the other axis crosses. Write CrossesType.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_DisplayUnit()

virtual void Aspose::Slides::Charts::IAxis::set_DisplayUnit ( DisplayUnitType  value)
pure virtual

Specifies the scaling value of the display units for the value axis. Write DisplayUnitType.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_HasTitle()

virtual void Aspose::Slides::Charts::IAxis::set_HasTitle ( bool  value)
pure virtual

Determines whether a axis has a visible title. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsAutomaticMajorUnit()

virtual void Aspose::Slides::Charts::IAxis::set_IsAutomaticMajorUnit ( bool  value)
pure virtual

Indicates whether the major unit of the axis is automatically assigned. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsAutomaticMaxValue()

virtual void Aspose::Slides::Charts::IAxis::set_IsAutomaticMaxValue ( bool  value)
pure virtual

Indicates whether the max value is automatically assigned. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsAutomaticMinorUnit()

virtual void Aspose::Slides::Charts::IAxis::set_IsAutomaticMinorUnit ( bool  value)
pure virtual

Indicates whether the minor unit of the axis is automatically assigned. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsAutomaticMinValue()

virtual void Aspose::Slides::Charts::IAxis::set_IsAutomaticMinValue ( bool  value)
pure virtual

Indicates whether the min value is automatically assigned. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsAutomaticOverflowBin()

virtual void Aspose::Slides::Charts::IAxis::set_IsAutomaticOverflowBin ( bool  value)
pure virtual

Specifies automatic overflow bin value. If false: use OverflowBin property.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsAutomaticTickLabelSpacing()

virtual void Aspose::Slides::Charts::IAxis::set_IsAutomaticTickLabelSpacing ( bool  value)
pure virtual

Specifies automatic tick label spacing value. If false: use TickLabelSpacing property. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsAutomaticTickMarksSpacing()

virtual void Aspose::Slides::Charts::IAxis::set_IsAutomaticTickMarksSpacing ( bool  value)
pure virtual

Specifies automatic tick marks spacing value. If false: use TickMarksSpacing property. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsAutomaticUnderflowBin()

virtual void Aspose::Slides::Charts::IAxis::set_IsAutomaticUnderflowBin ( bool  value)
pure virtual

Specifies automatic underflow bin value. If false: use UnderflowBin property.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsLogarithmic()

virtual void Aspose::Slides::Charts::IAxis::set_IsLogarithmic ( bool  value)
pure virtual

Represents if the value axis scale type is logarithmic or not. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsNumberFormatLinkedToSource()

virtual void Aspose::Slides::Charts::IAxis::set_IsNumberFormatLinkedToSource ( bool  value)
pure virtual

Indicates whether the format is linked source data. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsOverflowBin()

virtual void Aspose::Slides::Charts::IAxis::set_IsOverflowBin ( bool  value)
pure virtual

Specifies if overflow bin applied. Use IsAutomaticOverflowBin and OverflowBin to adjust overflow bin value.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsPlotOrderReversed()

virtual void Aspose::Slides::Charts::IAxis::set_IsPlotOrderReversed ( bool  value)
pure virtual

Represents if MS PowerPoint plots data points from last to first. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsUnderflowBin()

virtual void Aspose::Slides::Charts::IAxis::set_IsUnderflowBin ( bool  value)
pure virtual

Specifies if underflow bin applied. Use IsAutomaticUnderflowBin and UnderflowBin to adjust underflow bin value.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_IsVisible()

virtual void Aspose::Slides::Charts::IAxis::set_IsVisible ( bool  value)
pure virtual

Represents if the axis is visible. Write bool.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_LabelOffset()

virtual void Aspose::Slides::Charts::IAxis::set_LabelOffset ( uint16_t  value)
pure virtual

Specifies the distance of labels from the axis. Applied to category or date axis. Value must be between 0% and 1000%. Write uint16_t.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_LogBase()

virtual void Aspose::Slides::Charts::IAxis::set_LogBase ( double  value)
pure virtual

Represents the logarithmic base. Default value is 10. Write double.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_MajorTickMark()

virtual void Aspose::Slides::Charts::IAxis::set_MajorTickMark ( TickMarkType  value)
pure virtual

Represents the type of major tick mark for the specified axis. Write TickMarkType.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_MajorUnit()

virtual void Aspose::Slides::Charts::IAxis::set_MajorUnit ( double  value)
pure virtual

Represents the major units for the date or value axis. Write double.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_MajorUnitScale()

virtual void Aspose::Slides::Charts::IAxis::set_MajorUnitScale ( TimeUnitType  value)
pure virtual

Represents the major unit scale for the date axis. Write TimeUnitType.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_MaxValue()

virtual void Aspose::Slides::Charts::IAxis::set_MaxValue ( double  value)
pure virtual

Represents the maximum value on the value axis. Write double.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_MinorTickMark()

virtual void Aspose::Slides::Charts::IAxis::set_MinorTickMark ( TickMarkType  value)
pure virtual

Represents the type of minor tick mark for the specified axis. Write TickMarkType.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_MinorUnit()

virtual void Aspose::Slides::Charts::IAxis::set_MinorUnit ( double  value)
pure virtual

Represents the minor units for the date or value axis. Write double.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_MinorUnitScale()

virtual void Aspose::Slides::Charts::IAxis::set_MinorUnitScale ( TimeUnitType  value)
pure virtual

Represents the major unit scale for the date axis. Write TimeUnitType.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_MinValue()

virtual void Aspose::Slides::Charts::IAxis::set_MinValue ( double  value)
pure virtual

Represents the minimum value on the value axis. Write double.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_NumberFormat()

virtual void Aspose::Slides::Charts::IAxis::set_NumberFormat ( System::String  value)
pure virtual

Represents the format string for the Axis Labels. Write System::String.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_NumberOfBins()

virtual void Aspose::Slides::Charts::IAxis::set_NumberOfBins ( uint32_t  value)
pure virtual

Specifies number of bins when AggregationType property value setted to AxisAggregationType.ByNumberOfBins. Applied to category axes. Used with Histogram or HistogramPareto series only.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_OverflowBin()

virtual void Aspose::Slides::Charts::IAxis::set_OverflowBin ( double  value)
pure virtual

Specifies overflow bin custom value. Applied when IsAutomaticOverflowBin property setted to false and IsOverflowBin property equals true.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_Position()

virtual void Aspose::Slides::Charts::IAxis::set_Position ( AxisPositionType  value)
pure virtual

Represents position of axis. Write AxisPositionType.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_TickLabelPosition()

virtual void Aspose::Slides::Charts::IAxis::set_TickLabelPosition ( TickLabelPositionType  value)
pure virtual

Represents the position of tick-mark labels on the specified axis. Write TickLabelPositionType.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_TickLabelRotationAngle()

virtual void Aspose::Slides::Charts::IAxis::set_TickLabelRotationAngle ( float  value)
pure virtual

Represents the rotation angle of tick labels Write float.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_TickLabelSpacing()

virtual void Aspose::Slides::Charts::IAxis::set_TickLabelSpacing ( uint32_t  value)
pure virtual

Specifies how many tick labels to skip between label that is drawn. Write uint32_t.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_TickMarksSpacing()

virtual void Aspose::Slides::Charts::IAxis::set_TickMarksSpacing ( uint32_t  value)
pure virtual

Specifies how many tick marks shall be skipped before the next one shall be drawn. Applied to category or series axis. Write uint16_t.

Implemented in Aspose::Slides::Charts::Axis.

◆ set_UnderflowBin()

virtual void Aspose::Slides::Charts::IAxis::set_UnderflowBin ( double  value)
pure virtual

Specifies underflow bin custom value. Applied when IsAutomaticUnderflowBin property setted to false and IsUnderflowBin property equals true.

Implemented in Aspose::Slides::Charts::Axis.

◆ SetCategoryAxisTypeAutomatically()

virtual void Aspose::Slides::Charts::IAxis::SetCategoryAxisTypeAutomatically ( )
pure virtual

Sets IAxis.CategoryAxisType property with a value that is automatically determined based on axis data.

Implemented in Aspose::Slides::Charts::Axis.